Non-specialized hardware comparison

Graphics cards

Due to the rising hashrate of the bitcoin network caused by the introduction of ASICs to the market, GPU mining Bitcoins has become impracticable. The hashrate of most GPU units is below 1GH/s, and as of 2014, some single ASIC units are able to reach speeds of over 1,000GH/s while consuming far less power than used by a GPU. The information in this table is preserved for historical interest, but does not include many GPUs which were released after the advent of ASIC mining.

AMD (ATI)

Stream SDK 2.5 seems to have resolved many of the problems with earlier versions. Everyone's setups will be unique so this should only be a guide or starting point, not an absolute.

Model	Mhash/s	Mhash/J	Mhash/s/$[1]	Watts	Clock	SP	SDK	Slot	Miner	Notes
3410	0.89	0.074	?	12(?)	222	40	1.4 beta	PCI-E 1.1 x8	A custom Brook+ miner	Using 16,384 length streams
3XXX										OpenCL Not Supported
42XX										OpenCL Not Supported (integrated/mobile GPU)
4350	6.93	0.346	0.16	20	575	80	-	PCI-E 2.0 x16	poclbm	-w 32, don't use vectors
4350	7.2				600		1.1	PCI-E 2.0 x16	cgminer/Linux	default settings
4350	8.14	-	0.19	-	730	80	2.4	PCI-E 2.0 x16	Diablo/Windows7	-w 32. Model: Asus EAH4350 Silent. Memory at 400MHz. Runs at 60°C with ambient at 25°C.
4350	10.7	-	-	-	730	-	2.6	PCI-E 2.0 x16	CGMiner/Windows7	-v -w 64 Voltage set at 0.900 core set at 800MHZ and memory set to 200MHZ
4550	7.23	0.289	0.13	25	600	80	-	PCI-E 2.0 x16	poclbm	-w 32, don't use vectors
4550	7.8						-	PCI-E 2.0 x16	guiminer /phoenix	worksize=64 VECTORS
4570M	8.02	0.297	?	27	680	80	-	PCI-E 2.0 x16	Diablo/Windows7	-w 64, SDK 2.4, Cat 11.4. Model: Sony Vaio NW
4570M	9.6	0.300	?	32	825(OC)	80	-	PCI-E 2.0 x16	Diablo/Windows7	-w 64, SDK 2.4, Cat 11.4. Model: Sony Vaio NW. OC core 680->825. U/C memory 800->500.
4650	31.33	0.653	0.44	48	650	320	-	PCI-E 2.0 x16	poclbm	-w 32, don't use vectors
4670	36.14	0.613	0.34	59	750	320	-	PCI-E 2.0 x16	poclbm	-w 32, don't use vectors
4670	40.11	0.679	0.38	59	800	320	-	AGP x8	poclbm/Ubuntu 10.10 w/ H == 0 mod	-w 32 -f 0, don't use vectors source
4670	50	-	0.47	60	800	320	-	PCI-E 2.0 x16	guiminer	2 miners set up i7 920 (130W), CPU: Ufasoft, GPU: OpenCL; the CPU is getting about 40 Mhash/s while the GPU goes from 10-20 Mhash/s
4730	72.29	0.657	?	110	750	640	-	PCI-E 2.0 x16	-
4770	72.29	0.904	0.72	80	750	640	-	PCI-E 2.0 x16	-
4830	55.42	0.583		95	575	640	-	PCI-E 2.0 x16	-
4830	61.7	-		-	700	-	2.4	PCI-E 2.0 x16	poclbm-mod	Fedora 14
4830	64.9	-	-	-	700	-	2.4	PCI-E 2.0 x16	poclbm-mod	Fedora 14
4830	66.12	0.503		105	700	1005	-	PCI-E 2.0 x16	-
4850	75.30	0.685		110	625	800	-	PCI-E 2.0 x16	-
4850	84.3	0.766		110	725	300	-	PCI-E 2.0 x16	-	-w64 fan at 70% temp 73C, stock voltage -gui miner
4850	87.4	0.79	-	110	785	800	-	PCI-E 2.0 x16	guiminer	Phoenix; -k poclbm
4850	90.1	0.819		110	800	500	-	PCI-E 2.0 x16	guiminer	-f 30; Tried phoenix and phatk, got same max
4850	101	0.918		110	817	500	2.1	PCI-E 2.0 x16	guiminer	-f 0, core 817mhz(default 625)@1.123v , mem downclock to 500mhz (default 993) source
4850x2	150.60	0.602		250	625	1600	-	PCI-E 2.0 x16	-
4860	67.47	0.519		130	700	640	-	PCI-E 2.0 x16	-
4870	78	0.520		150	-	-	-	PCI-E 2.0 x16	m0mchil's OpenCL/Vista 64bit	source
4870	88			140	std	800	12.3.6	PCI-E 2.0 x16	phoenix 1.50 / 64bit OS X pyopencl / poclbm	Standard Mac Pro 3,1 with Apple HD4870 upgrade. Flags: FASTLOOP WORKSIZE=64 AGGRESSION=5 (don't use vectors, and hash rate drops to 60-70 if browser windows are visible, speeds up to 88 if you hide them!
4870	90.36	0.602		150	750	800	2.1	PCI-E 2.0 x16	clmine
4870	92.84	0.6189333(?)		150(?)	830(OC)	800	2.4	PCI-E 2.0 x16	Phoenix 1.48	-k poclbm AGGRESSION=5 (Windows 7 64-Bit, GPU OC 750->830MHz, VRAM UC 900->450MHz, BIOS modded)
4870	96			140	750	800	2.4	PCI-E 2.0 x16	Smartcoin r657s / phoenix 1.50 / Linuxcoin 0.2b final	Powercolor @ GPU 830 MHz/ MEM 200 Mhz @ 80% FAN @ 69 temp @ Flags: -k phatk bfi_int=false FASTLOOP=false WORKSIZE=256 AGGRESSION=11
4870	104			140	750	800	2.4	PCI-E 2.0 x16	Smartcoin r657s / DiabloMiner / Linuxcoin 0.2b final	Powercolor @ GPU 830 MHz/ MEM 200 Mhz @ 80% FAN @ 69 temp @ Flags: -v 1 -w 256
4870	104.2	?		?	830(OC)	800	2.1	PCI-E 2.0 x16	poclbm	Windows 7 64-Bit, GPU Core OC to 830 MHz, GPU Memory UC to 200 MHz By MSI AfterBurner. Card: Gainward Golden Sample. @70%Fan we have 55 GPU temp.
4870	104.6	0.872		120	830(OC)	800	2.1	PCI-E 2.0 x16	poclbm	-w 256 -f 1, Windows 7 64-Bit, GPU Core OC to 830 MHz, GPU Memory UC to 190 MHz (saves 30 watts at outlet)
4870	112			140	750	800	2.4	PCI-E 2.0 x16	BAMT 0.5c / cgminer	Powercolor @ GPU 875 MHz/ MEM 300 Mhz/ 1,25VDC @ 100% FAN @ 65 temp @ Flags: -v 1 -w 256
4870x2	180.6	0.632		286	800	1600	-	PCI-E 2.0 x16	-
4870x2	180.72	0.632		286	750	1600	-	PCI-E 2.0 x16	-
4870x2	203				850(OC)	1600	2.6	PCI-E 2.0 x16	poclbm-mod ver. 20 april 2011	Gainward / Win7 x64 / -w 256 -f 1 / 850MHz GPU - 300MHz Mem - 1,262V - 100% fun : 72C
4890	97.1	0.511		190	870(OC)	1050	2.4	PCI-E 2.0 x16	GUIMiner v2011-01-21 Solo settings	Sapphire fab. No flags options helped. Close all browsers and do full restart of GUIMiner and then Bitcoin via GUIMiner server starter or the browsers GPU accl. will limit to 56~ ish Mhash/s - I can now start browser without slowdowns
4890	102.41	0.539		190	850	800	-	PCI-E 2.0 x16	-
4890	108.3	0.57		190	975	800	-	PCI-E 2.0 x16	-
4890	121.5	-		190	1025 (OC)	800	2.4	PCI-E 2.0 x16	poclbm	no flags, Vcore 1.4
5450	11.99	0.631		19	650	80	-	PCI-E 2.1 x16	-
5450	13.74		-	-	700	-	-	PCI-E 2.1 x16	poclbm/Linuxcoin v0.2	-v -w128 tried several options, seems to work best.
5450	14.12		-	-	700	-	-	PCI-E 2.1 x16	Phoenix/Linuxcoin v0.2	Flags: "DEVICE=0 VECTORS AGGRESSION=4 -v FASTLOOP BFI_INT WORKSIZE=64" Kernel: "phatk"
5450	15.36		-	-	700	-	-	PCI-E 2.1 x16	Phoenix	Flags: "DEVICE=0 VECTORS AGRESSION=8 FASTLOOP BFI_ING WORKSIZE=128" Kernel: "phatk" - MagicSata
5450	18.10		-	-	774	-	-	PCI-E 2.1 x16	poclbm	-v -w 128 -f 1 774.66MHz/300.37MHz
5470	17.10		-	-	-	-	-	-	poclbm	-v -w 128 MobileGPU
5550	40.59	1.041		39	550	320	-	PCI-E 2.1 x16	-
5550	62.10	-	-	-	700	-	-	PCI-E 2.1 x16	Phoenix	700MHz core 800MHz ram, phatk mod, Flags: "-k phatk worksize=128 vectors aggression=4 bfi_int"
5570	59.96	1.538		39	650	400	-	PCI-E 2.1 x16	-
5570	62	1.59		39	650	400	2.4	PCI-E 2.1 x16	Phoenix 1.48 OpenCL/Linux x86_64	-k phatk DEVICE=0 VECTORS AGGRESSION=4 -v FASTLOOP BFI_INT WORKSIZE=64
5570	64	1.641		39	650	-	-	PCI-E 2.1 x16	m0mchil's OpenCL/WinXP	source
5570	73	1.872		39	700	400	2.4	PCI-E 2.1 x16	Phoenix 1.48 OpenCL/Linux x86_64	-k phatk DEVICE=0 VECTORS AGGRESSION=4 -v FASTLOOP BFI_INT WORKSIZE=64
5570	86.3	2.397		36	775	300	2.4	PCI-E 2.1 x16	Phoenix 1.75 OpenCL/Windows 7 x64 (no Aero)	-k phatk VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 -v WORKSIZE=256 Fan 100% 86C Undervolted @ 0.96v using Sapphire Trixx
5570	94	stock			880	800	2.4	PCI-E 2.1 x16	GUI Miner 02-12/Windows 7 x86	-v -w128 75C
5570	102	1.46(+)		75(-)	950	400	2.4	PCI-E 2.1 x16	Phoenix 1.48 OpenCL/Windows 7 x86 (no Aero)	-k phatk DEVICE=0 VECTORS AGGRESSION=7 -v FASTLOOP BFI_INT WORKSIZE=256 (Reference Sapphire card, 2 additional 120mm coolers, temperature is 79-82C)
5650	48	1.37		35(?)	-	-	-	PCI-E 2.1 x16	m0mchil's OpenCL/Win7-64	source source -- not TDP but load
5650	61.2			35			2.4	PCI-E 2.1 x16	Phoenix 1.50 OpenCL/Windows 7 x64	-k phatk DEVICE=0 VECTORS BFI_INT WORKSIZE=128 AGGRESSION=9
5670	71.49	1.117		64	775	400	-	PCI-E 2.1 x16	-
5670	72	1.64		44	850	-	-	PCI-E 2.0 x16	poclbm-mod (Win7-64)	Sapphire 100287VGAL card is low power
5670	85		-	-	900	400	-	PCI-E 2.1 x16	poclbm	-v -f 0 -w 128
5670	91		-	-	890	400	-	PCI-E 2.1 x16	guiminer 2011-06-09 poclbm catalyst 11.2 win7 x86	-v -f 0 -w 128
5670	100		-	-	890	400	-	PCI-E 2.1 x16	cgminer 1.5.6	GPU/Mem 890/800 temp 72C
5670	103	-		-	900/275	400	2.4	PCI-E 2.1 x1	phoenix-1.50 / phatk-mod / Ubuntu 11.04	VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 WORKSIZE=256 / small fan, under 50 deg C, no voltage tweaks... catfish
5670	127.8		-	-	850	-	-	PCI-E 2.1 x16	Windows 7 (64bit) Phoenix 2.0	Aggression=11 Worksize=128 Fastloop=False Opencl
5750	105	-	-	-	-	-	-	-	poclbm	Apple iMac 27inch (Mid 2010), Mac OSX 10.7 Lion
5750	116.24	1.352		86	700	720	-	PCI-E 2.1 x16	-
5750	137		-	-	710	720	-	PCI-E 1.1 x16	poclbm	-v -f 0 -w 128 using stock memory and GPU clocks
5750	146.4		-	-	775	720	-	PCI-E 2.0 x16	GUIMiner v2011-05-21	-v -w128, AMD Catalyst overclock (775MHz GPU / 1225 MHz Memory)
5750	154.56	1.45		106	830	720	-	PCI-E 2.1 x16	-	-v -w128 -f20 underclocked memory clocks from 1150MHz to 300MHz
5750	170	-		-	870	720	-	PCI-E 1.1 x16	poclbm	-v -f 0 -w 128 patched BIOS to underclock memory to 300MHz
5750	173	-		-	875	720	-	PCI-E 1.1 x16	phoenix	875/300 w/MSI Afterburner, BFI_INT VECTORS AGGRESSION=12 FASTLOOP=FALSE -k phatk
5750	177	-		-	910/575	720	2.6	PCI-E 2.0 x8	phoenix 1.5.6	PowerColor GoGreen+fan, MSI Afterburner 2.2Beta, -k phatk VECTORS AGGRESSION=12 FASTLOOP=FALSE WORKSIZE=64
5750	190	-		-	930/290	-	atistream sdk	PCI-E 1.1 x16	poclbm	930gpu / 290mem (O.S. Ubuntu 10.10 x64, overclock gpu & underclock mem) with poclbm options -v -f 0 -w 256
5750 Vapor-X	195	-	-	125	975/300	-	2.4	PCI-E 1.1 x16	cgminer 2.7.5	(O.S. Ubuntu 12.01 AMD64 dedicated) cgminer options -Q 0 -I 9 -g 2 -w 256 --auto-fan --temp-target 65 --gpu-vddc 1.075 (Fan speed 60~65%)
5750x2 CF	356	-		-	870	720x2	2.4	PCI-E 2.0 x16	cgminer v1.5.1 (Win7 64bit)	870MHz GPU / -I 8 / 2x GIGABYTE GV-R575SL-1GI cards + GIGABYTE GA-790FXTA-UD5 MB + 1x 80mm, 1x 90mm Noctua coolers
5770	156.83	1.452		108	850	800	2.1	PCI-E 2.1 x16	clmine
5770	171.12	-	-	-	-	stock	-	PCI-E 2.1 x16	phoenix 1.7.3/debian gnu/linux 6 squeeze	-k phatk2 DEVICE=0 VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 WORKSIZE=256
5770	180	1.406(*)		128(*)	950(OC)	800	2.4RC1	PCI-E 2.1 x16	poclbm	-v -w 128 -f 30 (*: Overclocked wattage calculated here)
5770 Hawk	182		-	-	875	800	2.4	PCI-E 2.0 x16	poclbm/GUIMiner/Win7-64	-v -w 128 (875MHz is stock for 5770 Hawk)
5770	185	-		-	850	1200	2.4	PCI-E 2.1 x16	phoenix 1.48 / phatk	-k phatk VECTORS BFI_INT WORKSIZE=128 FASTLOOP AGGRESSION=7
5770	205.58	-		-	935	300	2.1	PCI-E 2.1 x16	poclbm 2011-04-28	-v -w 256
5770	214.5	1.95(-)		108(+)	950	300	2.4	PCI-E 2.1 x16	phoenix 1.50/GUIMiner/Win7-64	mem underclocked 300 mhz, 1.1vcore, 950mhz core, @69°C/57%FAN VECTORS BFI_INT AGGRESSION=12 -k phatk WORKSIZE=256
5770	214.7	1.95(-)		108(+)	950	800	2.4	PCI-E 2.1 x16	phoenix 1.48 / win7x86	mem underclocked 309 mhz, -k phatk DEVICE=0 VECTORS BFI_INT FASTLOOP=false AGGRESSION=12
5770	216.5	-		-	955		2.1	PCI-E 2.0 x16	Phoenix 1.5 /phatk	Modified phatk kernel and stock voltage for Sapphire (1.125V) VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 -k phatk WORKSIZE=256
5770	218.35	-		-	1000	1401	2.1	PCI-E 2.0 x16	DiabloMiner	-w 128 -v 2 (Overclocked to 1Ghz core with 1.2 voltage and Scythe Setsugen 2 cooling system)
5770	223	2.23(-)		100(+)	1050	300	2.4	PCI-E 2.1 x16	guiminer	-v -w256 source
5770	227	-		-	1030	800	2.1	PCI-E 2.0 x16	DiabloMiner	-w 256 -v 2 (Overclocked to 1030 core/300 mem with 1.2 voltage and Scythe Setsugen 2 cooling system)
5770	233	2.23(-)		100(+)	1050	300	2.4	PCI-E 2.1 x16	phoenix 1.48	VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 -k phatk WORKSIZE=256 source
5770	236	-		-	1033/275	800	2.4	PCI-E 2.1 x16	phoenix-1.50 / phatk-mod / Ubuntu 10.04	VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 WORKSIZE=256 / big fans, under 75 deg C, no voltage tweaks... catfish
5770	240.61	2.3632(-)		100(+)	1080	300	2.4	PCI-E 2.1 x1	phoenix 1.48	VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 -k phatk WORKSIZE=256 (OC'd and OV'd 1080/300 1.25v)
5770	241	-	-	100(+)	1045	250	2.1	PCI-E 2.1 x16	phoenix 1.50	VECTORS BFI_INT AGGRESSION=13 -k phatk WORKSIZE=256 (OC 1020/300) XFX@1.1 volts. +Kernel function improve 5%
5770	244	-		-	1050	300	2.1	PCI-E 2.0 x16	Phoenix 1.75 /phatk2	Modified phatk kernel and stock voltage for Sapphire (1.125V) VECTORS BFI_INT FASTLOOP=false AGGRESSION=9, Temp 75C, FAN 100% (manual)
5770x2	425	-	-	225(+)	960	800x2	2.1	PCI-E 2.1 x16	poclbm (guiminer) Win7x64	-v -w128 (OC 960/1200)
5830M	120	-		-	570	120	2.4	PCI-E 2.1 x16	Phoenix 1.50 OpenCL/Win7 x64	-k phatk DEVICE=0 VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false
5830	244	1.36		179	800	1000	2.4	PCI-E 2.1 x16	Phoenix 1.48 OpenCL/Linux x86_64	-k phatk DEVICE=1 VECTORS AGGRESSION=6 -v FASTLOOP WORKSIZE=128 BFI_INT
5830	245	1.28		192	880	900	2.4	PCI-E 2.1 x16	poclbm (guiminer)	-v -w 256
5830	248	1.29		192	880	500	2.4	PCI-E 2.1 x16	phoenix 1.46	-k poclbm VECTORS BFI_INT AGGRESSION=11
5830	256	-		-	900	300	2.4	PCI-E 2.1 x16	phoenix 1.48	-k poclbm VECTORS BFI_INT AGGRESSION=7
5830	267	-		-	875	1000	2.4	PCI-E 2.1 x1	Phoenix 1.48 OpenCL/Linux x86_64	-k phatk DEVICE=1 VECTORS AGGRESSION=6 -v FASTLOOP WORKSIZE=128 BFI_INT
5830	272	1.52		179	875	-	2.4	PCI-E 2.1 x16	phoenix 1.48 / phatk / LinuxCoin	275Mhz Memory clock, 1.125 V (from 1.163), VECTORS AGGRESSION=12 BFI_INT
5830	275	1.5714		175	900	500	2.1	PCI-E 2.1 x16	poclbm (guiminer) Win7x64	-v -w64 -f10, XFX stock w/ v2.4 SDK = 230Mh/s, v2.1 SDK = +10Mh/s, overclocking core clock by 100 = +30Mh/s, underclocking memory to 500 (ran cooler), and changing workload to -w64 = +5Mh/s.
5830	285	-	1.58	-	960	-	2.4	PCI-E 2.1 x16	phoenix 1.47 / poclbm / Win7 64	VECTORS BFI_INT FASTLOOP=false AGGRESSION=12
5830	290	-		-	930	-	2.2	PCI-E x16/x4/x1	GUIMiner / phoenix 1.5 / POCLBM / Win 7 64	POCLBM VECTORS BFI_INT WORKSIZE=256 AGGRESSION=12 FASTLOOPS=false / Memory 300Mhz, VCore standard
5830	290	-		-	996	-	2.4	PCI-E 2.1 x16	phoenix 1.4 / poclbm / Win7 64	VECTORS AGGRESSION=12 BFI_INT
5830	295	-		-	980	1120	2.1	PCI-E 2.1 x16	GUIMiner / poclbm / Win XP 32	Extra flags -v -w 128
5830	297	-		-	970	1120	2.4	PCI-E 2.0 x16	guiminer / phoenix 1.48 / phatk / Win7 64	300Mhz Memory clock, 44% fan-speed, -k phatk VECTORS BFI_INT AGGRESSION=8 FASTLOOP=false WORKSIZE=256
5830	300	-		-	960	300	2.4	PCI-E 2.1 x16	GUIMiner / poclbm / Win 7 64	Extra flags -v -w 256 (Sapphire Extreme 71 degrees @ 52% fan)
5830	300	-		-	970	-	2.4	PCI-E 2.0 x16	phoenix 1.47 / pheonix 1.48 / Win7 64	(sapphire xtreme) VECTORS BFI_INT FASTLOOP=false AGGRESSION=12
5830	300	-		-	970	1120	2.1	PCI-E x16	phoenix 1.48 / phatk / Win7 64	300Mhz memory clock BFI_INT AGGRESSION=12 FASTLOOP=false WORKSIZE=256
5830	305	-		-	984	-	2.4	PCI-E 2.1 x16	phoenix 1.4 / phatk / Win7 32	400Mhz Memory clock, VECTORS AGGRESSION=12 BFI_INT FASTLOOP=false
5830	307	-		-	996	-	2.4	PCI-E 2.1 x16	phoenix 1.48 / phatk / Win7 64	VECTORS AGGRESSION=12 BFI_INT
5830	307	2.25	2.55	125	965	-	-	PCI-E 2.1 x16	cgminer 2.0.5 / Win7 64	Mem @ 300/Stock voltage/Entire system 200W
5830	308	-		-	990	300	2.4	PCI-E 2.1 x16	phoenix 1.50 / poclbm / Xubuntu 11.04 x64	VECTORS AGGRESSION=11 BFI_INT FASTLOOP=false WORKSIZE=256
5830	308	-		-	990	375	2.1	PCI-E 2.1 x16	phoenix 1.48 / phatk / Win7 32	@ stock voltage VECTORS AGGRESSION=11 -v FASTLOOP=false BFI_INT
5830 black	310		-	-	990	300	2.4	PCI-E 2.1 x8	LinuxCoin 0.2b, phoenix/phatk	(XFX Brand) -k phatk VECTORS BFI_INT WORKSIZE=256 AGGRESSION=11 FASTLOOPS=false
5830	311	-		-	1000	300	2.4	PCI-E 2.1 x16	phoenix 1.50 / phatk / Linux	VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false WORKSIZE=256
5830	315	-		-	970	-	2.4	PCI-E 2.1 x16	phoenix 1.6.1 / phatk2 / CrunchBang Linux	memory @ 300mhz VECTORS BFI_INT AGGRESSION=9 WORKSIZE=256
5830	316		-	-	1015	375	2.1	PCI-E 2.1 x16	phoenix 1.48 / phatk / Win7 32	@ stock voltage VECTORS AGGRESSION=12 -v FASTLOOP=false BFI_INT
5830	319	-	1.77	-	1030	-	2.4	PCI-E 2.1 x16	phoenix 1.48 / phatk / Xp 64	1.2v 355Mhz Memory, VECTORS AGGRESSION=12 BFI_INT
5830	321	-		-	1000	1120	2.4	PCI-E 2.0 x16	phoenix 1.50 / phatk-mod / Linux	1000Mhz GPU, 350Mhz RAM, 1.15V, 90% fan, ~60c Temp, VECTORS BFI_INT FASTLOOP=false AGGRESSION=13 WORKSIZE=128; phatk kernel found here
5830	323				900 (OC)		2.4	PCI-E 2.1 x16	phoenix 1.5 Win7x64	(500Mhz RAM), ~61c Temp, 57% fan, BFI_INT FASTLOOP=false VECTORS AGGRESSION=12 -v WORKSIZE=64
5830 (127$)	325	1.98	2.57Mh/$	165W	1040MHz	200MHz	2.6	PCI-E 2.0 x8	Guiminer/phatk-mod w7 64bit	-k phatk AGGRESSION=12 VECTORS2 WORKSIZE=128 stock volt, watercooled 53C
5830	328	-	-	-	1040	-	2.4	PCI-E 2.1 x16	LinuxCoin 0.2.1b / phoenix / phatk	1.195 V, RAM @ 325 Mhz, fan @90%, no case, extra 10K RPM fan (62 deg.C in full-load); options: -k phatk DEVICE=0 VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 WORKSIZE=256; brand: Sapphire Xtreme; bord is stable up to 1060 Mhz ~ 335 MHash, but produces some visual artefacts;
5830	331	-	4.14	-	1010	1120	2.4	PCI-E 1.0 x16	WinXP 32 / Phoenix 1.7.5 / phatk2	Stock Voltage, RAM 300, 64C, Fan 67%, -k phatk2 VECTORS BFI_INT AGGRESSION=11 WORKSIZE=256 FASTLOOP=false (+6Mh w/ Phoenix 1.7.5 over 1.6.2)
5830	333	-	-	-	1040	-	2.4	PCI-E 2.1 x16	LinuxCoin 0.2.1b / phoenix-1.50 / phatk-mod	+ ~5 Mhash increase using the modified phatk from the user above. I am the same guy with 330 @ 1040 MHz Sapphire Xtreme, all other settings the same, board stable, no increase in rejected
5830	334	-		-	1040	-	2.5	PCI-E 2.0 x16	phoenix 1.75 / phatk 2.2 / Win7 64	Stock voltage, 208Mhz Memory, VECTORS AGGRESSION=12 WORKSIZE=128 BFI_INT
5830	334	-		-	1030	-	2.4	PCI-E 2.1 x16	phoenix 1.50 / phatk 2.0 / Win7 64	Stock voltage, 385Mhz Memory, VECTORS AGGRESSION=12 WORKSIZE=256 BFI_INT -- (upped from 330 achieved with diapolo mod here), now using phatk 2.0 found here
5830	342	-	-	-	1045	-	2.4	PCI-E 2.0 x8	phoenix 1.48 / phatk 2.2 / WinSvr 2008 R2 64	Stock voltage, 385Mhz Memory, VECTORS VECTORS4 FASTLOOP=false AGGRESSION=14 BFI_INT -k phatk-2.2
5830x2 CF	480	-		-	800	-	2.4	PCI-E 2.1 x16	Guiminer	-v -f70 -w128
5830x2	570	-		-	950	-	2.4	PCI-E 2.1 x8	Guiminer/ - / Win7 64bit poclbm	poclbm -v -w256 -f10 MEMORYCLOCK 300MHZ GPUCLOCK 950MHZ FAN 52% 72°C
5830x2	608	-		-	990	-	-	2x PCI-E 2.0 x16	phoenix 2.0/ phatk2 / Win7 32bit	Stock voltage, 300Mhz Memory, VECTORS GOFFSET AGGRESSION=12 WORKSIZE=256 BFI_INT FAN 51% 69°C (Open ATX case)
5830x6	1967	1.62	1.97	-	1020/340	1120x6	2.4	PCI-E 2.1 x1	Phoenix 1.7.5/phatk2/BAMT Linux	100% fan @65C / 1.162V / CCC 11.6 / BFI_INT VECTORS FASTLOOP=false AGGRESSION=11 WORKSIZE=256
5850	240.77	1.595	1.49	151	725	1440	-	PCI-E 2.1 x16	-
5850	250.26	1.657		151	725	1440	-	PCI-E 2.1 x16	opencl client	source
5850	252	1.575		160	765	1440	2.3	PCI-E 2.1 x16	poclbm 2011-01-25
5850	255.3	1.593		160	765	1440	2.2	PCI-E 2.1 x16	poclbm 2011-01-25
5850	264	1.748		151	725	1440	2.4	PCI-E 1.0 x8	guiminer-20110501	-v -w128
5850	280	1.75		160	765	1440	2.2	PCI-E 2.1 x16	Phoenix 1.3	with BFI_INT
5850	280	-		-	725	1440	2.1	PCI-E 2.1 x16	Phoenix 1.50 / Fedora 14	-v -k poclbm VECTORS AGGRESSION=8 WORKSIZE=128 BFI_INT FASTLOOP=true
5850	282.75	3.06	-	92.25	666 (UC)	1440	2.1	PCI-E 2.1 x16	Phoenix/WinXP	undervolted to 0.95V; phatk2 VECTORS BFI_INT AGGRESSION=11 WORKSIZE=256; driver 10.12; clocktweak for setting values; thread
5850	292	1.825		160	765	1440	2.1	PCI-E 2.1 x16	poclbm 2011-04-28 -v -f 1
5850	298	1.8620		160	765	1440	2.1	PCI-E 2.1 x16	poclbm 2011-04-28 -v -f 1 -w 64
5850	300	1.5460		194	925(OC)	1440	-	PCI-E 2.1 x16	m0mchil's OpenCL	source
5850	304	-		-	725 (stock)	1440	2.1	PCI-E 2.1 x16	cgminer.exe -v 2 -I 8 -w 256 --gpu-memclock 275
5850	314	1.8362		171	820(OC)	1440	2.4	PCI-E 1.0 x8	poclbm	-v -w128
5850	328	-		-	875 @ Stock voltage	1440	2.4	PCI-E 2.1 x16	phoenix	70C @42% fan, mem @ 500mhz; -v -k phatk VECTORS BFI_INT AGGRESSION=8 FASTLOOP=false WORKSIZE=128
5850	330	-		-	850 @ Stock voltage	1440	2.1	PCI-E 2.0 x16	phoenix	EAH5850, miner arguments: -k poclbm DEVICE=1 VECTORS AGGRESSION=8 WORKSIZE=128 BFI_INT FASTLOOP=false
5850	331	-		-	725 (Stock)		2.4	PCI-E 2.0 x16	Diablo Win7 64bits	Sapphire 5850 Xtreme, Arguments: -v 2 -w 192 (by Swapper 2011-07-05)
5850	335	1.8611		180	890(OC)	1440	2.4	PCI-E 2.0 x8	poclbm	-v -w128, Memory downclocked to 300Mhz
5850	344	1.8594		185	890(OC)	1440	-	PCI-E 2.0 x16	phoenix
5850	347	-		-	876	1440	2.4	PCI-E 2.0 x16	guiminer / phoenix 1.48 / phatk / Win7 64	300Mhz Memory clock, 50% fan-speed, -k phatk VECTORS BFI_INT AGGRESSION=11 FASTLOOP=false WORKSIZE=256
5850	354	-		-	900(OC)	1440	2.1	PCI-E 2.0 x16	diablo -v 2 -w 128	Ubuntu 11.04 64-bit Headless, catalyst 11.5, memory downclocked to 300mhz, stock voltage. flashed with atiflash video
5850	355	-		-	900(OC)	1440	2.1	PCI-E 2.0 x16	phoenix 1.48 / phatk	Ubuntu 11.04 64-bit, Memory downclocked to 200MHz, VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 WORKSIZE=128
5850	355	-		-	900	1440	2.1	PCI-E 2.0 x16	phoenix 1.48 / phatk / Ubuntu 11.04 x64	300Mhz Memory clock, 60% fan-speed, -k phatk VECTORS BFI_INT AGGRESSION=11 FASTLOOP=false WORKSIZE=256
5850	356	-		-	870 (OC)	1440	2.5	PCI-E 2.0 x16	cgminer 2.1.2 / Win 7 x64	302Mhz Memory clock, 85% fan-speed, Stock Voltage, -I 6 -v 2 -w 256 (2012-02 by Swapper)
5850	359	-		-	900	1440	2.4	PCI-E 2.0 x16	phoenix 1.50 / phatk / Ubuntu 11.04 x64	300Mhz Memory clock, 66% fan-speed, -k phatk VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false WORKSIZE=256
5850	365	-		-	920	1440	2.1	PCI-E x16	phoenix 1.48 / phatk / Win7 64	300Mhz memory clock VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false WORKSIZE=256
5850	367.5	-		-	900(OC)	1440	2.1	PCI-E 1.0 x16	diablo with bitless's hack, -v 2 -w 128	RHEL 5U5 x86_64, catalyst 11.5, Sapphire HD 5850 Xtreme, Memory downclocked to 300MHz, core voltage 1.145V, BIOS modded with RBE
5850	369.4	-		-	930	1440	2.4	PCI-E 1.0 x16	guiminer / phoenix / phatk / Win7 32	Catalyst 11.5, XFX HD5850, Memory downclocked to 322MHz, -k phatk VECTORS BFI_INT AGGRESSION=13 WORKSIZE=256
5850	372	1.68	-	220 @ Wall	900	300	2.5	PCI-E 1.1 x8	cgminer 2.3.1 from source / Ubuntu 11.11 x86_64	-I 8 -v 2 -w 256 --- hex-core opteron cpu w/ 12GB RAM and cgminer CPU bug in linux makes power usage a little high ~210w in windows 7 x86_64
5850	375	-		-	940	1440	2.4	PCI-E 2.0 x16	phoenix 1.50 / phatk / Ubuntu 10.04	300Mhz memory clock VECTORS AGGRESSION=13 WORKSIZE=256 BFI_INT FASTLOOP=false
5850	381	-		-	940	1440	2.5	PCI-E 1.0 x16	phoenix / phatk / Win7 x64 / Catalyst 11.6	MSI Afterburner 500MHz memory clock,-k phatk VECTORS BFI_INT WORKSIZE=256 AGGRESSION=13
5850	382	1.8454		207	995(OC)	1440	-	PCI-E 2.0 x8	phoenix	OC 1.177v on core
5850	391	-	-	180	725	1440	2.4	PCI-E 2.0 x16	Win 7 Ultimate x64 / DiabloMiner / Catalyst 12.2	ASUS DirectCU @ GPU 960 MHz / MEM 300 Mhz @ Voltage 1.2 @ 70% FAN @ 69 temp @ Flags: -v 2,1 -w 256
5850	391	-		-	1000	1440	2.1	PCI-E 2.0 x16(@x8)	phoenix 1.5 / phatk / Win7 64	Mem @ 280, fan @ 100%, Temp @ 71, 1.163 V core, -v -k phatk VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false WORKSIZE=256, The name is Mautobu
5850	392	-	2.43	-	990	1440	2.4	PCI-E 2.1 x16	phoenix-svn (AUR) / phatk / Arch Linux	Memory: 180MHz, -v -q 1 -k phatk WORKSIZE=128 VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false
5850	397	-		-	950	1440	2.5	PCI-E 2.1 16x	phoenix 1.5 / phatk 2.2 / Win7 64, catalyst 11.6	Mem speed 350Mhz, Fan 85%, 70C, 1.083 Vcore, -k phatk VECTORS BFI_INT AGGRESSION=12 FASTLOOP=false WORKSIZE=256
5850	400	-		-	1000	1440	2.4	PCI-E 2.1 x16	Phoenix 1.5 Win7 x64	Memory 600MHz, Vcore 1.225, 73C, -k phatk WORKSIZE=128 VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false, 3% phatk mod
5850	404	-		-	965	1440	2.5	PCI-E 2.0 x16(@x8)	phoenixsvn / phatk2 / Ubuntu 11.04 / catalyst 11.8	5870 bios flash, Mem @322, fan@55%, Temp@83oC, 1.163Vcore, -k phatk2 VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false WORKSIZE=256
5850	408	-	-	-	999/275	1440	2.4	PCI-E 2.1 x16	phoenix 1.50 / phatk-mod / Ubuntu 10.04	Fan 70%, temp < 60 deg C, Sapphire 5 heatpipe card, same flags as above/below (edit1- oops, no voltage tweaks... edit2- wow, phatk-mod makes a difference... catfish)
5850	412	-		-	1010	1440	2.4	PCI-E 2.0 1x>16x	phoenix 1.5 / phatk 3% mod / Win7 64 11.5	VECTORS BFI_INT AGGRESSION=12 -k phatk
5850	414.8	-		-	1018	450	2.4	PCI-E 2.0 16x	GUIMiner / Win7 64 11.7	I use Sapphire HD5850 Toxic 2GB and for OC TRIXX Sapphire Tweak Utility v4.0.2. 72 deg C, fan 100%, core 1018mhz, mem 450Mhz, stock voltage (1.163). proof: http://img23.imageshack.us/img23/2367/414upload.png GUIMiner parameters: -v -w256 -f1
5850	420	-		-	1055	300	2.5	PCI-E 2.0 1x>16x	phoenix 1.5 / phatk 3% mod / Win7 64 11.6	Fan 80%, 66C, 1.250 Vcore, -k phatk PLATFORM=0 DEVICE=0 VECTORS BFI_INT AGGRESSION=8 And proof: http://i.imgur.com/s9hqs.png
5850	431	-		-	1040	1440	2.4	PCI-E 2.0 4x>16x	phoenix-svn / phatk kernel / Debian Wheezy AMD64 + fglrx 11.6	fan 100%, vcore 1.1750 V, 72C, VECTORS BFI_INT AGGRESSION=15 FASTLOOP=false -k phatk, proof: http://imageshack.us/photo/my-images/199/431u.png/
5850	432.15	-		-	1040	500	2.5.793.1	PCI-E 2.0 16x	phoenix 1.7.5 / phatk2 kernel / Win7 x64 SP1	fan 100%, vcore 1.212 V, 69C, VECTORS4 BFI_INT AGGRESSION=13 FASTLOOP=false WORKSIZE=64 -k phatk2, proof: http://dl.dropbox.com/u/18704286/mining%205850.png/ ... Card is REF HIS 5850 ... i mining at this speed for stable but... max unstable (if i play video/flashvideo it will crash) is 436.48Mhash/sec with core 1051 mem 500 vcore 1.237 (same other settings) it's too hot in VRM that not sound good to me... i don't want to kill it for my fun mining ... - Nito Niwatori
5850x2	620	-		-	800	1440	2.4	PCI-E 2.0 x16	Guiminer ( cl miner ) v2012-02-19 Win7 x64	MSI OC-Edition, -v -w 128
5850x2	702	-	-	-	905 (OC)	1440	2.5	PCI-E 2.0 x16 (x2)	phoenix 2.0.0 / Win 7 x32	ASUS DirectCU: 304Mhz Memory clock, 66% fan-speed, Voltage Tweak, AGGRESSION=13 FASTLOOP=false WORKSIZE=256 (https://www.dropbox.com/s/9u6f2jz3sz1poxb/5850.jpg)
5850x2	720	-		-	875 (OC)	1440	2.5	PCI-E 2.0 x16	cgminer 2.1.2 / Win 7 x64	302Mhz Memory clock, 85% fan-speed, Stock Voltage, -I 6 -v 2 -w 256 (2012-02 by Swapper)
5850x3	1,010	-		-	850	-	2.4	PCI-E 2.0 (x3)	GUIMiner	MSI Afterburner settings: 850MHz core clock and 500MHz memory clock
5850x4	1360	1.94		700@wall	900				poclbm
5850x6	2,135	-		-	900	-	2.5	PCI-E 2.0 (6 total, 4 full length, 2 @ PCIE1x with risers	GUIMiner 24/8/2011 - poclbm	Win 7 64Bit, Gigabyte GA-890FXA-UD5 motherboard, 4gb ram, AM3 cpu, Kingston SSD, Catalyst 11.8 drivers, guiminer switches: -v -f1 -w128, MSI Afterburner settings: 900MHz core clock and 1000MHz memory clock, cable risers required to fit all 6 cards, fans 100% Proof: http://i.imgur.com/6s7zv.jpg
5870M	152.5	-		-	750(OC)	1000	2.1	PCI-E 2.1 x16	gui-miner (win-7)
5870M	189.2	-		-	850(OC)	1000	2.5	PCI-E 2.1 x16	Wins 7 64/gui-miner (win-7)	-v -w128 -f0 Graphics Overdrive setting 700->850 core clock & 900->1030memory clock . +35mhs over stock settings
5870	313	1.665		188	900?	1600	2.3	PCI-E 2.1 x16	Diablo/Linux
5870	313.65	1.668	1.65	188	850	1600	2.1	PCI-E 2.1 x16	clmine
5870	340	1.809		188	850	1600	-	PCI-E 2.1 x16	m0mchil's OpenCL	source
5870	343	1.824		188	900?	1600	2.1	PCI-E 2.1 x16	Diablo/Linux
5870	355	1.888		188	900?	1600	2.1	PCI-E 2.1 x16	poclbm/Linux
5870	360	1.6822		214	970	700	-	PCI-E 2.0 x16	m0mchil's OpenCL w7-64	-f 0 -v -w 128 source
5870	379	2.015		188	850	1600	-	PCI-E 2.0 x16	hashkill-0.2.5 alpha	-D -G2
5870	397	-		-	930	1600	2.4	PCI-E 2.0 x16	Phoenix 1.48	-k phatk VECTORS BFI_INT AGGRESSION=10 WORKSIZE=128
5870	400	1.9047		210	950	1600	2.4	PCI-E 2.0 x8	Phoenix 1.3	-k poclbm VECTORS AGGRESSION=7 FASTLOOP BFI_INT
5870	408	1.8888		216	980	1600	2.1	PCI-E 2.0 x16	poclbm/Win7x64	-f 20 -v -w 128, BIT_ALIGN, BFI_INT
5870	414	1.9255		215	975	1600	2.4	PCI-E 2.0 x16	guiminer/w7x64	-k poclbm -v -w 256 -f 1 VECTORS BITALIGN BFI_INT -- Memory Clock 300
5870	420	2.0000		210	950	1600	2.4	PCI-E 2.0 x16	Phoenix 1.48	-k phatk VECTORS BFI_INT AGGRESSION=14 WORKSIZE=256 -- Memory Clock 300Mhz
5870	421	1.9581		215	975	1600	2.4	PCI-E 2.0 x16	Phoenix 1.47	VECTORS BFI_INT AGGRESSION=13 -k phatk
5870	421.5	2.007		201	950	1600	-	PCI-E 2.0 x16	hashkill-0.2.5 alpha	-D -G2 (GPU OC to 900, memory downclocked to 900)
5870	430				980	1600	2.4	PCI-E 2.0 x16	Phoenix 1.48/Windows 7 64	-k phatk VECTORS BFI_INT AGGRESSION=14 WORKSIZE=256 -- Memory Clock 300Mhz
5870	432				985	1600	2.4	PCI-E 2.0 x16	Phoenix 1.73/Windows 7 64	-k phatk VECTORS BFI_INT AGGRESSION=11 WORKSIZE=128 Memory Clock=900Mhz Asus 76C Fan=60% 65F ambient
5870	435	-		-	990	300	2.4	PCI-E 2.0 x8	LinuxCoin v0.2b phoenix/phatk	(Powercolor brand) -k phatk VECTORS BFI_INT WORKSIZE=256 AGGRESSION=11 FASTLOOPS=false
5870	437		1.90		960	-	2.1	PCI-E 2.0 x1	phoenix 1.50 + phatk	Card is clocked with BIOS flash @ 960Mhz Core and 300Mhz Memory. More information and pictures: http://bitcointalk.org/index.php?topic=7216.msg324521#msg324521
5870	438	1.9819		221	1000(OC)	1600	2.1	PCI-E 2.0 x16	poclbm/Linux	-v -w 64 -f 1
5870	440	2.0000		220	995	1600	2.4	PCI-E 2.0 x16	Phoenix
5870	445	2.28	2.34	195	1005	335	2.4	PCI-E 2.0 x4	Ubuntu 11.04 phoenix/phatk	(Asus brand, volts = 1'072) -k phatk VECTORS BFI_INT WORKSIZE=256 AGGRESSION=12 FASTLOOPS=false -a 7 (-a 10)
5870	453				980	1600	2.5	PCI-E 2.1 x16	Phoenix 1.50/Windows 7 64 catalyst 11.6 phatk 2.2	-k phatk VECTORS BFI_INT AGGRESSION=12 WORKSIZE=256 FASTLOOPS=false -- Memory Clock 350Mhz Vcore 1.163v
5870	458	-		-	1040	1600	2.1	PCI-E 2.0 x16	poclbm/Windows 7 64	-v -w 256 -f 1 Crossfired, Water cooled, 916 Mhash/s total. Best dual gpu setup me thinks? The name is Mautobu.
5870	460				1050	1600	2.4	PCI-E 2.0 x16	Guiminer	-k phatk VECTORS BFI_INT AGGRESSION=14 WORKSIZE=256 -- Memory Clock 300Mhz vcore @ 1225mV
5870	460				1020	1600	2.4	PCI-E 2.0 x16	Phoenix 1.50/Windows 7 64	VECTORS BFI_INT AGGRESSION=12 WORKSIZE=256 -k phatk -- Memory Clock 300Mhz vcore @ 1225mV, 3% phatk mod
5870	461				1000	1600	2.5	PCI-E 2.0 x16	phoenix 1.75/Windows 7 64	-k phatk2 (phatk 2.2) VECTORS BFI_INT AGGRESSION=9 WORKSIZE=128, Memory Clock=213, stock voltage
5870	481				1050	1600	2.5	PCI-E 1x	phoenix 1.75/Windows 7 64	-k phatk2 (phatk 2.2) VECTORS BFI_INT WORKSIZE=64 AGGRESSION=20 [MSI HD 5870 Ref Design vs Zalman VF3000A 1200mv Mem 600MHz]
5870x2 (CF)	864	-		-	900	3200	2.1	PCI-E 2.1 x16	guiminer	-k phatk VECTORS FASTLOOP=false AGGRESSION=7 BFI_INT WORKSIZE=128 (Same flags per GPU)
5870x2 (Ares)	620	-		-	850	3200	2.1	PCI-E 2.1 x16	guiminer	-v -w 128
5870x2 (Ares)	826	0.751		1100	950	3200	2.1	PCI-E 2.1 x16	phoenix 1.4 w/ Phtak	AGGRESSION=13 WORKSIZE=128 VECTORS BFI_INT Memory @ 300MHz
5870x2 (Ares)	826	1.18		700	935	3200	2.4	PCI-E 2.1 x16	phoenix 1.48 w/ Phatk	AGGRESSION=13 WORKSIZE=256 VECTORS BFI_INT FASTLOOP=false, memory @ 319 MHz, Windows 7 32-bit
5870x2 (Ares)	878	0.585		1500	1000	3200	2.1	PCI-E 2.1 x16	phoenix 1.7 w/ Phtak	AGGRESSION=13 WORKSIZE=128 VECTORS BFI_INT Memory @ 300MHz
5870x4	1784		1.29		960	-	2.1	PCI-E 2.0 x1	phoenix 1.50 + phatk + Version 2.2 Improvement	Cards are clocked with BIOS flash @ 960Mhz Core and 300Mhz Memory. More information and pictures: http://bitcointalk.org/index.php?topic=7216.msg324521#msg324521
5870x6	2568	-		1200	970	-	2.4	PCI-E 2.1 x16	poclbm/debian32bit	-v -w128, voltage default, Mem downclocked to 300 MHz, Fan 80-90% (+ 4x12cm fun 1900rpm), Temp 6x 70-75C. Whole computer comsumpts 1280Watt. Using PCI-E risers 16x-16x to use 6 GPU cards
5970	530	1.803	0.53 ?	294	725	3200	2.4.595.10	PCI-E 2.1 x16	poclbm/201103.beta3/Windows	-v -w128 -f60
5970	535.06	1.820		294	725	3200	2.1	PCI-E 2.1 x16	clmine
5970	560	1.905		294	725	3200	-	PCI-E 2.1 x16	Diablo
5970	565	1.922		294	725	3200	2.1	PCI-E 2.1 x16	clmine2
5970	604	2.054		294	725	3200	2.1	PCI-E 2.1 x16	clmine
5970	645	1.875		344	850	3200	2.1	PCI-E 2.1 x16	m0mchil/poclbm 03-07-11	-f1, Debian 6, fglrx-driver 10.9.3
5970	739				795	3200	2.4	PCI-E 2.1 x16	cgminer 2.3.1	-I 9 -k phatk -w 256 -v 2, memory clock @ 265MHz, Debian Squeeze, fglrx-driver 12.1.1, performance scales linearly with engine clock as long as memory clock is 1/3
5970	740	2.1511		344	850	3200	2.1	PCI-E 2.1 x16	phoenix/1.3	AGGRESSION=12 WORKSIZE=128 VECTORS BFI_INT, memory clock @ 300MHz
5970	755	2.2076		342	848	3200	2.1	PCI-E 2.1 x16	poclbm 28-04-11	-f 1 -w 256 -v, Ubuntu 10.10, fglrx 11.4, memory clock @ 300MHz
5970	802	2.31		347	850	3200	2.4	PCI-E 2.1 x16	phoenix poclbm Ubuntu 11.04	-q 6 -k AGGRESSION=19 WORKSIZE=128 BFI_INT VECTORS, fglrx 11.4, mem clock @ 1000MHz
5970	820	???		???	910	3200	2.4	PCI-E 2.1 x1	Phoenix 1.5 Win7	AGGRESSION=12 WORKSIZE=256 BFI_INT VECTORS -k phatk, 11.5, Mem @ 300MHz, 1.110v, 3% phatk mod
5970	822.2	-		-	950	3200	2.4	PCI-E 2.1 x16	phoenix win7	-k phatk -q 6 AGGRESSION=20 WORKSIZE=128 BFI_INT VECTORS, but with this increasing difficulty mining becomes pretty pointless
5970	833	-		-	930	3200	2.4	PCI-E 2.1 x16	phoenix 1.7.5, win7 x64, catalyst 11.7	-k phatk AGGRESSION=13 WORKSIZE=256 BFI_INT VECTORS fastloops=false. memory@300mhz, 1.125v, fan 100%, 73C core temp, 95c voltage controllers. it will clock higher but not stable without a voltage increase and i fear for the VRMs
5970	863.4	-		-	955	3200	2.4	PCI-E 2.1 x16	Diablo - Debian	-v 2 -w 256 (XFX Radeon HD 5970 Black Edition)
6310M	9.821	0.545		18	500	80	2.4	Integrated/APU	poclbm-gui -v -w128	HP DM1z 18W TDP is shared with the CPU
6450	27.0	1.5	-	18	625	160	2.4	PCI-E 2.0 x16	guiminer/poclbm 2011-06-14	-v -w128 Sapphire HD6450 1gb ddr3 Ubuntu 11.04 64bit
6450	32.6	1.918	-	17	725	800	2.4	PCI-E 2.0 x16	guiminer/Phoenix1.75 Windows 7 x64 (no Aero)	-k phatk VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 -v WORKSIZE=64 Dell OEM HD6450 1gb ddr3 passive cooling/no fan 81C
6450	37.8	?	-	17	850	800	2.4	PCI-E 2.0 x16	Phoenix2.0.0 Windows 8 x64	-k phatk2 VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 -v WORKSIZE=64 Sapphire HD6450 1GB DDR3 passive cooling/no fan 150MHz memory/1000mV VCore
6470M	24.1	-		-	-	-	2.1	Integrated/APU	guiminer
6470M	31.0	-		-	-	-	2.1	Integrated/APU	phoenix 1.48
6480G	24.1	-		-	-	-	2.1	Integrated/APU	phoenix 1.75
6490M	15.21	-		-	-	-	-	-	DiabloMiner GUI v2011-05-22 / Mac OS X 10.6.7	Model: MacBookPro8,2 VRAM: 256MB
6490M	16.289	0.708		23	-	-	-	PCI-E 2.1 x16	poclbm-mod (Mac OS X 10.6.7)	MacBook Pro early 2011
6490M	17.18	-		-	-	-	-	PCI-E 2.1 x16	phoneix 1.50 with poclbm, Mac OS X 10.6.7	MacBook Pro 2,8 VRAM: 256MB. phoenix -k poclbm VECTORS BFI_INT FASTLOOP
6490M	32.1	-		-	-	-	-	-	guiminer 2011-07-01 with poclbm (Win7-x64)	MacBookPro8,2 (WinX64) -v -w128 -f0
6520G	33.8	-		-	400	320	-	Integrated/APU	guiminer 2011-07-01 with OpenCL (Win7-64bit)	-v -w128 on Toshiba L775D-S7222
6530D	40.5	-		-	444	320	2.4	FM-1	cgminer 2.4.1	Integrated/APU A6-3500; Linux; Catalyst 11.11; APP-SDK-v2.4 (595.10)
6550D(A8 Onboard)	66.2	-		-	-	-	2.5	FM-1	guiminer 2011-07-01 with OpenCL (Win7-64bit)	-v -w128 -f60
6550D	67.6	-		-	600	400	2.5	FM-1	guiminer 2011-07-01 with OpenCL (Win7-64bit)	-v -w128 -f2
6570	68.0	1.133		60	650	480	2.4	PCI-E x16	guiminer 2011-05-21 with poclbm (Win7-32bit)	no extra option for miner . Sapphire 6570 gddr5 512mb
6570	82.1	1.368		60	650	480	2.4	PCI-E x16	guiminer 2011-05-21 with poclbm (Win7-32bit)	-v -w128 . Sapphire 6570 gddr5 512mb
6570	86.0	1.95	-	44	650	480	2.4	PCI-E x16	guiminer/poclbm 2011-06-14	-v -w128 Sapphire Ultimate HD6570 1gb ddr3 Ubuntu 11.04 64bit
6570	112.0	-		-	860	480	2.7	PCI-E 2.0 x16	guiminer 2012-02-19/poclbm (Win7-64bit)	-v -w128 -f1 . Sapphire 6570 Low Profile gddr3 1024mb
6570	114.0	-		-	866	480	2.7	PCI-E 2.0 x16	guiminer 2012-02-19/poclbm (Win7-64bit)	-v -f 0 -w128 -a 3 . XFX 6570 Full Profile gddr3 1024mb 64 bit
6630M	48.80	-		-	-	-	-	-	DiabloMiner GUI v2011-06-18 / Mac OS X 10.7	Mac Mini 2011 MC816D/A
6630M	63.00	-		-	600	480	2.5	PCI-E 2.0 x16	DiabloMiner Windows	Lenovo ThinkPad Edge E320 (card overclocked using Sapphire TRIXX)
6670	102.20	-		-	800	-	-	PCI-E 2.1 x16	poclbm/Debian sid	-v -f 0 -w 128
6670	104.00	-	1.0	-	820	-	-	PCI-E 2.1 x16	guiminer(poclbm)/Win 7	-v -a4 -f15 -d0 -w64
6670	110.00	-	1.0	-	850	-	-	PCI-E 2.1 x16	guiminer(poclbm)/Win 7	-v -f 0 -w 128 -q 6
6670	111.77	1.69	-	66	910	480	2.7	PCI-E 2.1 x16	Phoenix 1.7.5	-k phatk2 BFI_INT AGGRESSION=5 VECTORS WORKSIZE=128
6670	120.1	-	-	-	900	480	2.7	PCI-E 2.1 x16	cgminer 2.7.4	kernel: diablo i:10 core: 900 mem: 750
6670	124.0	-	-	66	940	800	2.4	PCI-E 2.0 x16	Phoenix2.0.0 Windows 8 x64	-k phatk2 VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 -v WORKSIZE=128 Sapphire HD6670 Ultimate 1GB DDR5 passive cooling/no fan 300MHz memory/1100mV VCore
6750	142	-		150	700	-	-	PCI-E 2.1 x16	poclbm	-v -w128, Gigabyte SL (passive cooler), watts is TDP, card runs very hot (>90°C)
6750	167.59	-		-	870	-	-	PCI-E 2.1 x16	guiminer	-v -f30 -w128
6750	172.00	-		-	860	600	-	PCI-E 2.1 x16	guiminer 2012-02-19/poclbm (Win7-64bit) MSI Afterburner 2.2.3	-v -w128 f-20 Sapphire 6570 GDDR3 1024Mb CCC ver. 11.12 OCL 2.5
6750M	41.48	-		-	870	-	-	PCI-E 2.1 x16	diablominer
6750M	60	-		-	-	-	-	-	diablominer OSX 10.7 WorkSize=128
6770	180	-		-	850	1200	-	-	guiminer	-v -w128 , this was an XFX (OEM) model, GPU @ 850 MHz, mem @ 1200 MHz; I pushed it up to 190 Mhash/s briefly by overclocking, but it crashed the system above that
6770	202	-		-	960	800	-	PCI-E 2.1 x1,x4,x8,x16	phoenix 1.48	Sapphire 6770 (standard) -q2 -k poclbm DEVICE=0 AGGRESSION=10 VECTORS WORKSIZE=128 BFI_INT FASTLOOP (The PCI-E speed does not affect the mining speed)
6770	217	-		-	960	800	-	PCI-E x16	Guiminer with phoenix	Sapphire 6770 -k phatk VECTORS BFI_INT WORKSIZE=128 FASTLOOP=false AGGRESSION=12 with https://bitcointalk.org/index.php?topic=22965.0 modification
6770	221	-		-	1010	300	2.4	PCI-E 2.0 x8	Phoenix 1.50	MSI 6770 -k phatk PLATFORM=0 DEVICE=0 VECTORS BFI_INT WORKSIZE=256 FASTLOOP=false AGGRESSION=13 3% Stock voltage.
6770	235	-		-	1010	300	2.4	PCI-E 2.0 x8	Phoenix 1.50	Sapphire 6770 -k phatk PLATFORM=0 DEVICE=0 VECTORS BFI_INT WORKSIZE=256 FASTLOOP=false AGGRESSION=13 3% mod https://bitcointalk.org/index.php?topic=22965.0 and AS5 paste on core w/ external 12" fan 50C full load. Stock voltage.
6770x2	470	-		-	1010	300	2.4	PCI-E 2.0 x8	Phoenix 1.50	Sapphire 6770 -k phatk PLATFORM=0 DEVICE=0 VECTORS BFI_INT WORKSIZE=256 FASTLOOP=false AGGRESSION=13 3% mod https://bitcointalk.org/index.php?topic=22965.0 and AS5 paste on core w/ external 12" fan 50C full load. Stock voltage.
6790	220	1.467		150	800	-	-	PCI-E 2.1 x16	Phoenix 1.48	-k phatk BFI_INT FASTLOOP AGGRESSION=12 VECTORS OC'd to 1ghz, underclocked mem to 300, voltage at 1175
6790	219	1.467		150	960	-	-	PCI-E 2.1 x16	guiminer	-v -f0 -w128 / GPU OC to 960MHz under Windows7 64bit
6850	171.59	1.351	1.07	127	775	960	2.1	PCI-E 2.1 x16	clmine
6850	196	-		-	850	960	-	PCI-E 2.1 x16	poclbm	-v -w 128 -f 0
6850	220	1.236(*)		178(*)	1000(OC)	960	2.4RC1	PCI-E 2.1 x16	poclbm	-v -w 128 -f 30 (*: Overclocked wattage calculated here )
6850	234.8		-	-	940	960	2.4	PCI-E 2.1 x16	Phoenix 1.3	AGGRESSION=8 WORKSIZE=128 VECTORS BFI_INT
6850	236.0		-	-	940	960	2.4	PCI-E 2.1 x16	Phoenix 1.4	-k phatk AGGRESSION=12 WORKSIZE=128 VECTORS BFI_INT, Core @ 900MHz, Memory @ 300MHz
6850	244.2		-	-	960	960	2.1	PCI-E 2.0 x16	poclbm june-2011	-v -w 128
6850	245.1		-	200	940	960	2.4	PCI-E 2.0 x16	guiminer (Phoenix)	Sapphire 6850 (Memory @1000MHz); Win7 64bit; flags: -k phatk VECTORS BFI_INT FASTLOOP=false AGGRESSION=14 WORKSIZE=128
6850	250	1.612(*)	-	155(*)	940 (OC)	960	2.4	PCI-E 2.0 x16	AOCLBF 1.74 (Phoenix 1.5**) @Win7/x64	XFX 6850 (Memory @840MHz; Vdcc @1.148V; Fan @74%; Temp @70C; System @39C); flags: -k phatk BFI_INT FASTLOOP VECTORS AGGRESSION=11 WORKSIZE=128 (: Overclocked wattage calculated here / *: Tainted Kernel)
6850	256.2		-	170	980	960	2.7	PCI-E 2.0 x16	phoenix 1.7.5 / Win7 32bit	-k phatk -VECTORS BFI_INT AGGRESSION=9, Sapphire VaporX 1GB, mem@250MHz, stock VDDC 1.150V
6850	262.5		-	-	965	525	2.4	PCI-E 2.0 x16	guiminer / poclbm	-v -f 0 -w 128 (HIS 6850 flashed to HIS 6870 BIOS)
6850	267.2		1.67	-	1010(OC)	960	2.4	PCI-E 2.0 x16	guiminer / phoenix 1.50	-k phatk VECTORS BFI_INT AGGRESSION=11 worksize=128 FASTLOOP=false
6850	301.4		1.67	-			2.4	PCI-E 2.0 x16	guiminer / poclbm	-v -f 2 -w 128 clock @ 985 mem @ 890
6870	232.47	1.540	1.22	151	900	1120	-	PCI-E 2.1 x16	poclbm -v -w 128
6870	245	-		-	900	1120	2.4	PCI-E 2.0 x16	ph rising 1.45 phoenix 1.50 phatk 11.5 sdk 2.4	HD5xxx+ Fastloop phatk AGGRESSION=10
6870	264.5	-	-	-	980	1050	-	PCI-E 2.1 x16	GUIMiner v2011-05-01	Stays around 66*C if I keep the side panel off and the room well ventilated. Card is PowerColor branded. Windows 7 Ultimate SP1 with Classic theme. Fan is at 100%. -v -w128
6870	271	1.807		150	940	1120	2.4	PCI-E 2.0 x16	poclbm -v -w 128	Debian 6.0.1 x86_64
6870	277.47	-		-	940	1120	-	PCI-E 2.1 x16	Phoenix 1.3	AGGRESSION=8 WORKSIZE=128 VECTORS BFI_INT
6870	279	1.847(?)		151(?)	900	1120	2.4	PCI-E 2.1 x16	hashkill-0.2.5 alpha cat 11.4 sdk 2.4	-G2 -D stock clocks, debian linux 64bit
6870	281.7	1.172 (stock)		-	980	1120	2.4	PCI-E 2.1 x16	guiminer-v2011-06-09	xfx6870, flags: -v 19 -w 128, win7 32-bit
6870	293.13			-	945	1050	2.5	PCI-E 2.1 x16	Phoenix 1.5 Phatk	xfx6870, Catalyst 11.6, 1.5 Phoenix flags: -k phatk FASTLOOP=false DEVICE=0 VECTORS BFI_INT AGGRESSION=13 WORKSIZE=128; http://bitcointalk.org/index.php?topic=25860.0 Kernel Patch; http://bitcointalk.org/index.php?topic=6458.0 Cmd; http://developer.amd.com/tools/gDEBugger/Pages/default.aspx No Crossfire Required; runs faster without crossfire 1% + additional 3% from update
6870	294			-	980	1120	2.4	PCI-E 2.1 x16	phoenix phatk	xfx6870, 340MHz memory clock, Catalyst 11.6, flags: BFI_INT VECTORS AGGRESSION=9 WORKSIZE=256
6870	294			-	985	1100	2.4	PCI-E 2.0 x8	Diablo	Powercolor branded card, Win 8 x64, -v 1 -w 256
6870	295	2.02	1.64	146	950	1120	2.4	PCI-E 2.1 x16	hashkill latest as of 7/6/11 (ubuntu 11.4)	hashkill-gpu -p bitcoin user:pass:server -D, mem clock 850, voltage @ 1.175, Fan @ 70%, Temp @ 71C.
6870	297	-		-	1000	1120	2.4	PCI-E 2.0 x16	ph rising 1.62 phoenix 1.50 phatk 11.5 sdk 2.4	Vectors HD5xxx+ Fastloop phatk AGGRESSION=11 WORKSIZE=128
6870	300	-		-	940	1120	2.5	PCI-E 2.1 x16	Phoenix 1.6.2 phatk2	xfx6870 Black Edition, 340MHz Memory Clock, Catalyst 11.6, VECTORS BFI_INT AGGRESSION=13 WORKSIZE=128, Debian Linux 64-Bit, Fan @ 50%, Temp @ 75C
6870	300	1.72	-	174	1038	1120	2.4	PCI-E 2.1 x16	poclbm windows7x86 cat 11.4	-v -w128 -f1 mem clock 360, fan 100% temp 73C
6870	300.06	1.830		164	1020	1120	2.4	PCI-E 2.1 x16	Phoenix 1.4 cat 11.4	VECTORS BFI_INT AGGRESSION=8 fastloop mem clock 344
6870	302	-		-	940	1120	2.5	PCI-E 2.1 x16	cgminer 2.1.2	xfx6870 Black Edition, 340MHz Memory Clock, Catalyst 11.6, -w 256 -I 9, Debian Linux 64-Bit, Fan @ 50%, Temp @ 75C
6870	307	1.72	-	174	1001/\1001	1120	2.4	PCI-E 2.1 x16	poclbm windows7x86 cat11.8	-v -w128 -f5,85°C
6870	310	-	-	-	1000	1120		PCI-E 2.1 x16	cgminer 3.1.0 (Ubuntu Server 12.04 LTS AMD64)	intensity=13, vectors=2, worksize=128, kernel=diablo, gpu-engine=1000, gpu-memclock=900
6870	310	-	-	-	1035	1120	2.4	PCI-E 2.1 x16	phoenix 1.48 phatk 11.5 sdk 2.4	BFI_INT VECTORS FASTLOOP=false AGGRESSION=12 WORKSIZE=128, mem clock @ 300MHz, voltage @ 1.300
6870	310	-		-	975	1120	2.4	PCI-E 2.1 x16	phoenix phatk linuxcoin	BFI_INT VECTORS FASTLOOP=false AGGRESSION=13 WORKSIZE=128, mem clock @ 340MHz, core clock @ 970MHz, flashed bios, 72 degrees w/ fan @ 68%, GIGABYTE SOC
6870	312	-		-	975	300	2.4	PCI-E 2.1 x16	phoenix 1.50 / phatk / Windows 7 x64 SP1	VECTORS BFI_INT AGGRESSION=11 FASTLOOP=false WORKSIZE=256, mem clock @ 300MHz, voltage @ 1.300, Fan @ 45%, Temp @ 62C, MSI 6870 HAWK.
6870	314	-		-	1030	1120	2.4	PCI-E 2.1 x16	phoenix 1.50 / phatk / Linux	VECTORS BFI_INT AGGRESSION=11 FASTLOOP=false WORKSIZE=256
6870	316	-		-	1030	1120	2.4	PCI-E 2.1 x16	guiminer 2011-06-09 using phoenix (Win7-32bit)	-k phatk platform=0 device=0 VECTORS BFI_INT AGGRESSION=11 worksize=128 FASTLOOP=false, mem clock @ 228MHz, voltage @ 1.25, Fan @ 40%, Temp @ 73C
6870	320	-	-	160	950	1120	2.4	PCI-E 2.0 x16	Win 7 Ultimate x64 / DiabloMiner / Catalyst 12.1	Saphire @ GPU 1030 MHz / MEM 300 Mhz @ Voltage 1.25 @ 80% FAN @ 69 temp @ Flags: -v 2 -w 128
6870	321	-		-	1050	1120	2.4	PCI-E 2.1 x8	aoclbf 1.7 phoenix 1.50 11.6	Vectors HD5xxx+ phatk AGGRESSION=13 WORKSIZE=256, Memory=325MHz, Volts=1.3V, Fan~55%, Temps~70C
6870	322	1.882		170	1050	1120	2.4	PCI-E 2.1 x16	phoenix 1.47 phatk 11.5 sdk 2.4	BFI_INT VECTORS FASTLOOP=false AGGRESSION=12 WORKSIZE=256, mem clock @ 400MHz
6870	329	-		-	1075	1120	2.4	PCI-E 2.1 x16	phoenix 1.48 phatk 11.5 sdk 2.4	BFI_INT VECTORS FASTLOOP=false AGGRESSION=11 WORKSIZE=256
6870	332	-	1.74	-	1050	1120	2.4	PCI-E 2.1 x16	guiminer 2011-06-14 using phoenix (Win7-32bit)	-k phatk platform=0 device=0 VECTORS BFI_INT AGGRESSION=13 worksize=128 FASTLOOP=false, mem clock @ 228MHz, voltage @ 1.3, Fan @ 60%, Temp @ 74C, flash and browser hardware acceleration disabled, aero enabled.
6870	339.25	-	-	-	1090	1120	2.6	PCI-E 2.1 x16	Phoenix 1.7.3 cat 12.1	Mem @ 350Mhz Clock @ 1090 Voltage 1.337 fan @ 100 Temp @ 75 diapolo's modified phatk kernel -k phatk_dia platform=0 device=0 VECTORS2 AGGRESSION=11 worksize=64 FASTLOOP=false BFI_INT
6870	375	-	-	-	1000	1120	2.5	PCI-E 2.0 x16	Win 7 Ultimate 32-bit / Guiminer v2011-07-01 / phoenix 1.5 / phatk2 / Catalyst 11.9	XFX / GPU @ 1000 MHz / MEM @ 200 Mhz / Voltage @ 1.187 V / FAN @ 40% / Temp @ 72 C / Flags: -k phatk2 platform=0 device=0 VECTORS BFI_INT AGGRESSION=6 worksize=128 FASTLOOP=false / Using 2 miners with equal settings on 1 GPU
6870x2	600	-	-	-	945	330	2.5	PCI-E 2.0 x16	Ubuntu 12.04 32-bit / Phoenix 2 / phatk2 / Catalyst 11.9	XFX / GPU @ 945 MHz / MEM @ 330 Mhz / Voltage @ 1.175 / Config: phatk2 VECTORS4 BFI_INT AGGRESSION=12 worksize=128 FASTLOOP=false GOFFSET=True
6870x4	1150	-	1.2	-	900	1050	2.4	PCI-E 2.0 x16	phoenix 1.7 (Win7-64bit)	-k phatk platform=0 device=0-3 VECTORS BFI_INT AGGRESSION=11 worksize=128 FASTLOOP=false
6870x4	1180	-	-	145	950	1120	2.4	PCI-E 2.1 x16	poclbm/debian32bit	-v -w128, Gigabyte SOC. voltage 1.175 (default), GPU default 950 MHz, Mem downclocked to 300 MHz, Fan 4x100% (+ 2x12cm fun 1300rpm), Temp 4x75C (in summer).
6870x4	1200	-	-	150	970	1120	2.4	PCI-E 2.1 x16	poclbm/debian32bit	-v -w128, Gigabyte SOC. voltage 1.175 (default), GPU overclocked from 950 to 970 MHz, Mem downclocked to 300 MHz, Fan 4x100% (+ 2x12cm fun 1300rpm), Temp 4x75C (in summer). Unstable with GPU@975 MHz.
6930	320	-	-	-	960	1200	2.1	PCI-E 2.1 x16	phoenix 1.75/phatk	stock voltage, BFI_INT FASTLOOP VECTORS AGGRESSION=13 WORKSIZE=64. 70C, FAN 80% (HIS brand)
6930	370	-	-	-	980	855	2.4	PCI-E 2.1 x16	cgminer-2.4.1	stock voltage (1,160), -I9. 71C, FAN 85% (HIS brand)
6930	372	-	1.89(?)	-	1000	900	2.4	PCI-E 2.1 x16	phoenix 1.75/poclbm	max stable @ 1200 mV, BFI_INT FASTLOOP VECTORS AGGRESSION=13 WORKSIZE=64
6930x2	700	-	-	400~	940	2560	2.4	PCI-E 2.1 x16	Guiminer	max stable @ 1100mV mem 300, Fan 80-90%, temp 70-75, -v -w64 -f10
6950	272	-	0.90	-	900	1408	2.4	PCI-E 2.1 x16	phoenix 1.48/poclbm	max stable @ 1150 mV, AGGRESSION = 7, BFI_INT, MSI 6950
6950	291	-		-	920	1408	2.4	PCI-E 2.1 x16	phoenix 1.48/poclbm	max stable @ 1200mV, AGGRESSION = 7, BFI_INT, MSI 6950
6950	295	-		-	930	1408	2.4	PCI-E 2.1 x16	phoenix 1.48/poclbm	max stable @ 1275mV, AGGRESSION = 7, BFI_INT, MSI 6950
6950	295	1.844(?)		160(?)	810	1536	2.4.595.0	PCI-E 2.1 x16	m0mchil/poclbm 03-07-11	unlocked shaders, default mem 1250
6950	300	-		-	940	1408	2.4	PCI-E 2.1 x16	phoenix 1.48/poclbm	max stable @ 1300mV, AGGRESSION = 7, BFI_INT, MSI 6950
6950	314	-		-	800	1408	2.4.595.0	PCI-E 2.1 x16	guiminer/poclbm 05-01-11	-v -f30 -w128 default mem 1250 Stock Sapphire 6950 1gb
6950	325	1.635(?)		200(?)	885	1536	2.4.595.0	PCI-E 2.1 x16	m0mchil/poclbm 03-07-11	unlocked shaders, default mem 1250
6950	332	1.95~	1.2~	170~	840	1408	2.5.684.212	PCI-E 2.1 x16	guiminer/poclbm 2011-06-14	-v -w 128 -f 0, WinXP x86, Cat11.6b, desktop on IGP, Sapphire 1GB w/ HW locked BIOS, +40MHz GPU OC, 160W ACP + 5% OC = 170W new estimated ACP
6950	333	1.95~	1.2~	170~	840	1408	2.4.650.9	PCI-E 2.1 x16	guiminer/poclbm 2011-06-14	-v -w 128 -f 0, WinXP x86, Cat11.6, desktop on IGP, Sapphire 1GB w/ HW locked BIOS, +40MHz GPU OC, 160W ACP + 5% OC = 170W new estimated ACP
6950	338	1.84~	-	184~	860	1408	2.4	PCI-E 2.1 x16	Phoenix 1.50/poclbm kernel	Sapphire 2GB card w/ HW locked BIOS; Cat 11.6, Win7 x64; core @ 860MHz & 1087mV (OC + undervolt), mem @ 860MHz; cmd line args: VECTORS BFI_INT AGGRESSION=11 WORKSIZE=128; power and MH/J calculated using Power = Cfv^2 w/ assumption of 175 W at stock settings w/ 100% GPU util. (not measured)
6950	340	-		-	895	1408	2.4	PCI-E 2.1 x16	guiminer/poclbm 05-21-11	-v -w 128, mem @ 500, 1200 mV, MSI 6950
6950	340	-		-	800	1536	(?)	PCI-E 2.1 x16	guiminer/poclbm 05-21-11	-v -f30 -w128 default mem 1250,Sapphire 6950 1gb, unlocked shaders
6950	343	2.14	-	160	840	1536	2.4	PCI-E 2.1 x16	phoenix 06-27-11	VECTORS BFI_INT AGGRESSION=11 WORKSIZE=128 FASTLOOP=false, HIS H695FN2G2M 2GB, mem @ 720, Kill-a-Watt measured
6950	344	2.02~	1.27~	170~	840	1408	2.5.684.212	PCI-E 2.1 x16	poclbm/20110709	-v -w 128 -f 0, WinXP x86, Cat11.6b, desktop on IGP, Sapphire 1GB w/ HW locked BIOS, +40MHz GPU OC, 160W ACP + 5% OC = 170W new estimated ACP
6950	344.4	-		-	800	1536	-	PCI-E 2.1 x16	guiminer/poclbm	Powercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1.
6950	349	1.745(?)		200(?)	800	1408	-	PCI-E 2.1 x16	guiminer/poclbm 05-21-11	-v -f30 -w128, xfx 6950 xxx 1gb, locked shaders, core 900, mem 650, 79° C
6950	351	1.91~	-	184~	860	1408	2.4	PCI-E 2.1 x16	GUIminer/poclbm v2011-07-01	Sapphire 2GB card w/ HW locked BIOS; Cat 11.6, Win7 x64; core @ 860MHz & 1087mV (OC + undervolt), mem @ 860MHz; cmd line args: -v -w 128 -f 0; (same system as the 338 MH/s result above using Phoenix)
6950	352.8	-		-	820	1536	-	PCI-E 2.1 x16	guiminer/poclbm	Powercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1.
6950	360	1.8(?)		200(?)	970	1536	2.4.595.0	PCI-E 2.1 x16	m0mchil/poclbm 03-07-11	unlocked shaders, default mem 1250
6950	360	-		-	870	1375	-	PCI-E 2.1 x16	guiminer/poclbm	flashed with 6970 BIOS, -v -f30 -w128
6950	365	-		-	925	1408	-	PCI-E 2.1 x16	guiminer/poclbm	stock bios, -v -f0 -w128, MSI twinfrozr III 2GB
6950	366.4	-		-	850	1536	-	PCI-E 2.1 x16	guiminer/poclbm	Powercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1.
6950	381	-		-	850	1536	-	PCI-E 2.1 x16	cgminer/phatk	XFX 6950 2Gb reference @ shadermod on original Bios 6950 / 1100mV 850/1250, +10% powertune, I=5, Fan @ 54% ~3100RPM, temp 73C w128. Windows7x64, Catalyst 13.1 .
6950	383	-		-	975	1408	-	PCI-E 2.1 x16	guiminer/poclbm	stock bios, -v -f0 -w128, voltage 1.274 @72c MSI twinfrozr III 2GB
6950	388.4	-		-	900	1536	-	PCI-E 2.1 x16	guiminer/poclbm	Powercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1.
6950	389.9	-		-	950	1408	-	PCI-E 2.0 x16	cgminer 2.3.2/Diablo	stock bios, -I 9, VRAM @ 820Mhz, fan @ 100%, voltage 1.250v, temp @ 68c, HIS ICE-Q X 2GB, OCed using MSI Afterburner, Windows 7 Professional 64-bit SP 1
6950	400~	-		-	895	320	1536	PCI-E 2.1 x16	GUIMiner 24th Aug 2011	Sapphire HD6950 Shader unlock mod 1408>1536 / +20% Power control, Fan @ 55%, Flags:-v -f2 -w64 -r5.Note this keeps temps under 80oC which is needed for this to be stable.Moderate fan noise.Power use is ~200W.
6950	403	-		-	939	685	-	PCI-E 2.1 x16	phoenix-1.50/phatk	ASUS EAH6950 ((Ref. 6950 Flashed -> 6970)) / +10% overdrive volt., Fan @ 90%, VECTORS BFI_INT WORKSIZE=128 AGGRESSION=13. Overclocked from 880 -> 939 with MSI Aferburner
6950	408.8	-		-	925	1536	-	PCI-E 2.0 x16	cgminer 2.12	GIGABYTE GV-R695D5-2GD-B @ shadermod on original Bios 6950, mem@625, V=1100mv Fan @ 60%. Windows 7x64, Catalyst 11.9
6950	410.4	-		-	950	1536	-	PCI-E 2.1 x16	guiminer/poclbm	Powercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1.
6950	417	2.085(?)		200(?)	975	1536	2.4.595.0	PCI-E 2.1 x16	guiminer/poclbm	unlocked shaders, +20% overdrive, mem @ 1250, fan @ 77%, temp 64C, -v -w128, gpu core @ 1145mV
6950	418.8	-		-	940	1536	-	PCI-E 2.1 x16	guiminer/poclbm	Gigabyte OC 1GB, shadermod, voltage locked 1.175, mem 450, -w128 -v -f0, ATI Tray Tool
6950	425.3	-		-	950/850	1536	-	PCI-E 2.1 x16	phoenix-1.50/phatk2 (Ubuntu natty)	Asus 1GB DirectCU, shadermod on OEM BIOS, OEM 1.1v, AMDOverdriveCtrl for 950 core 850 mem, 20% overdrive, flags VECTORS2 BFI_INT FASTLOOP=false AGGRESSION=13 WORKSIZE=128
6950	428	2.14(?)		200(?)	1000	1536	2.4.595.0	PCI-E 2.1 x16	guiminer/poclbm	unlocked shaders, +20% overdrive, mem @ 1250, fan @ 80%, temp 64C, -v -w128, gpu core @ 1160mV
6950	432	2.16(?)	1.44	200(?)	1000	1536	2.4.595.0	PCI-E 2.1 x16	guiminer/poclbm	unlocked shaders, +20% overdrive, mem @ 520, fan @ 80%, temp 76C, -v -w128 -f 2, gpu core @ 1275mV
6950	432.4	-		-	1000	1536	-	PCI-E 2.1 x16	guiminer/poclbm	Powercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1.
6950	440				990	1536	2.4	PCI-E 2.1 x16	guiminer/phatk	unlocked shaders, mem @ 1375, VGPU 1.21v, Watercooled (MCW60), temp 54C, VECTORS BFI_INT AGGRESSION=11 -k phatk
6950	454.4	-		-	1050	1536	-	PCI-E 2.1 x16	guiminer/poclbm	Powercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1.
6950x2 CF	720	-	-	400 ~	900	1408	2.4.595.0	PCI-E 2.1 x16	GUIMiner v2011-07-01	MSI Afterburner - gpu @ 900 (870 stock), mem @ 900 (1250 stock), temp 69-71C(bottom vga) fan@94% / 77-81C(top vga) fan@99% - 31C enviornment, -v -f 1 -w 128 BFI_INT
6950x2 CF	731	-	-	400~	900	1408	2.4.595.0	PCI-E 2.1 x16	GUIMiner v2011-07-01	MSI Afterburner - gpu @ 900 (870 stock), mem @ 900 (1250 stock), temp 68C(bottom vga) fan@90% / 73C(top vga) fan@99% - 28C enviornment, -v -f 1 -w 128 BFI_INT AGGRESSION=13
6950x3	1081	-		-	860	1408	2.4(?)	PCI-E 2.1 x8	guiminer/poclbm 07-01	Sapphire 2GB stock bios, stock voltage, locked shaders: +20% overdrive, mem@650, fan@95%, temp 94C, -v -f0 -w128, 93c
6950x4	1316	1.513		870	840	1408	2.4.595.0	PCI-E 2.1 x16	m0mchil/poclbm 03-07-11	locked shaders, default mem 1250, dual fan 75C typical
6970	323	1.468	0.92	220	880	1536	2.3	PCI-E 2.1 x16	poclbm	-w 64, SDK 2.1 not supported on 69xx.
6970	365	2.28		160	880	1536	2.5	PCI-E 2.1 x16	guiminer/phoenix	VECTORS AGGRESSION=9 WORKSIZE=128, fan @ 45%, 61C, 1.0 Vcore, 150 MHz mem, TX650w (84%), reference card
6970	370	-		-	880	1536	2.4	PCI-E 2.1 x16	guiminer/poclbm	-v -w128, fan @ 50%/temp 72C, stock card
6970	372	1.691(?)		220(?)	900	1536	2.4	PCI-E 2.1 x16	phoenix (svn trunk 05.14.2011)	clock 900/1375, VECTORS BFI_INT AGGRESSION=11 WORKSIZE=128, fan 45% (auto) / temp 90C
6970	380	-		-	-	-	2.4	PCI-E 2.1 x16	poclbm	-v -w128 export GPU_USE_SYNC_OBJECTS=1 # to reduce poclbm CPU from 100% to 2%
6970	385	1.964		196	900	1536	2.4	PCI-E 2.1 x16	guiminer/poclbm	-v -w128, memory downclocked to 684Mhz, fan @ 70%/temp 81C
6970	388	-		-	900	1536	2.4	PCI-E 2.1 x16	guiminer/poclbm	-v -w128, fan @ 50%/temp 72C, stock voltage of 1.175v
6970	403	-		-	MAX	1536	2.4	PCI-E 2.1 x16	guiminer/poclbm	clock Max/50%+stock, -v -w128, fan= 100%/temp 72C (Note: Overclocked using CCC utility under Windows 7, Clock set to Max value w/ 50% increase to memory and 5% increase to voltage)
6970	406	-		-	950	1536	2.4	PCI-E 2.1 x16	phoenix 1.50/phatk	GPU Overclocked to Max (950MHz) using aticonfig, Memory Underclocked using AMDOverdriveCtrl (850MHz). Temp ~ 82C. VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 WORKSIZE=128
6970	407	-		-	955	1536	2.4	PCI-E 2.1 x16	poclbm	-v -w128, fan 75%/temp 75C, voltage +10%
6970	414	-		-	960	1536	2.4	PCI-E 2.1 x16	guiminer/poclbm	-v -w128, fan @ 53%/temp 73C, stock voltage of 1.175v, high air flow case
6970	420	-		-	975	1536	2.4	PCI-E 2.1 x16	guiminer/poclbm	-v -w128 -f0, clocks 975MHz/685MHz MSI Lightning
6970	423	-	1.20	-	995	1536	2.4	PCI-E 2.1 x16	phoenix 1.48/poclbm	ATI Tray Tools, Clocks=995/331.25, WORKSIZE=128 BFI_INT AGGRESSION=11 VECTORS ,68C @ 65% Fan, HAF932 Case
6970	431	-	-	-	976	1536	2.4	PCI-E 2.1 x16	phoenix 1.7/phatk2	MSI AFTERBURNER, Clocks[976/1000], -k parameters[VECTORS BFI_INT AGGRESSION=11], Temperatures{CARD}[86C@100% Fan]{ROOM}[27C/81F],
6970	433	-	-	-	975	1536	2.6	PCI-E 2.1 x16	phoenix 1.6.2/phatk	MSI Afterburner 2.2Beta, -k phatk AGGRESSION=11 WORKSIZE=128 VECTORS, GPU 65C@100% Fan, Room 21C
6970x2	710	-		-	900/880	1536	2.2	PCI-E 2.1 x16	poclbm	-w 256
6970x2	828	-		-	940	1536	2.4	PCI-E 2.1 x16	poclbm	-v -w128, fans 74%/82%, temp 74C/82C, powertune +20% (via CCC), memory underclock 825MHz (via MSI Afterburner), with 'Maj' fix
6970x3	1243	-		1000+	910	1536	2.5	2x16, 1x8	phoenix 1.7.0	fans 100%, temp 88C/84C/69C, GPU 920/ memory 795/ powertune 20%, ATI 11.11, -k phatk2 VECTORS BFI_INT FASTLOOP=false WORKSIZE=128 AGGRESSION=13
6990	670	1.94	0.89	346	830	3072	2.4	PCI-E 2.1 x16	poclbm	Catalyst 11.4 source.
6990	704				830	3072	2.4	PCI-E 2.1 x16	Diablo Win7 64bits	Catalyst 11.4, Arguments: -v 2 -w 128 (by Swapper 2011-07-07)
6990	708	2.05		346	830	3072	2.3	PCI-E 2.1 x16	mrb's hdminer	BIOS switch at "default" position 2, see source
6990	744				830	3072	2.5	PCI-E 2.1 x16	Diablo Win7 64bits	Catalyst 11.6b, Arguments: -v 2 -w 128 (by Swapper 2011-07-14)
6990	746	1.82		410	880	3072	2.3	PCI-E 2.1 x16	mrb's hdminer	BIOS switch at "overclocked" position 1, see source
6990	758	-		-	880	-	2.4	-	Phoenix with Poclbm	Catalyst 11.4, OC switch ON, VECTORS AGGRESSION=12 BFI_INT WORKSIZE=128 FASTLOOP=false
6990	771	1.8804		410	880	3072	2.3	PCI-E 2.1 x16	mrb's hdminer	SDK 2.1 not supported on 69xx. Memory clock @ 1280Mhz.
6990	772	1.8380		420	900	3072	2.3	PCI-E 2.1 x16	Phoenix & Poclbm	OC switch ON + overclocked to 900 mhz, VECTORS AGGRESSION=12 BFI_INT WORKSIZE=128
6990	790	-		-	900	3072	2.3	PCI-E 2.1 x16	mrb's hdminer	BIOS switch at "overclocked" position 1; with "aticonfig --odsc=900,1260" to further overclock the GPU to 900 MHz and mem to 1260 MHz, see source
6990	795	-		-	-	-	2.4		Diablo's miner	BIOS switch at "overclocked" position 1; On Windows Vista, Clocks set at 955,1250. Power control at 20. Diablo's args: -w 128 -g 5 -v 2 -f 0
6990	802	-		-	915	3072	2.3	PCI-E 2.1 x16	mrb's hdminer	BIOS switch at "overclocked" position 1; with "aticonfig --odsc=915,1260" to further overclock the GPU to 915 MHz and mem to 1260 MHz, see source
6990	835	-	1.11	-	890/860	3072	2.4	PCI-E 2.1 x16	phoenix	BIOS switch at "overclocked" position 1; with "aticonfig --adapter=1 --odsc=990,890 and aticonfig --adapter=0 --odsc=960,860" (GPU 0 runs hot). Currently, aticonfig can only underclock RAM to 100mhz below core speed. Command line: phoenix.py -k poclbm VECTORS AGGRESSION=13 WORKSIZE=128 BFI_INT
6990	852	-		-	955	3072	2.5	PCI-E 2.1 x16	cgminer 2.1.2	Memory: 830 Mhz, -v 2 -w 128 -I 9, Watercooled, stock voltage. (2012-02 by Swapper)
6990	865	-	1.11	-	890/860	3072	2.4	PCI-E 2.1 x16	cgminer	BIOS switch at "overclocked" position 1; with core 0 at 990/890 engine/mem, core 1 at 960/860 (runs hot). Watercooled at 65-68C.
6990x2	1436	1.848		777	880	6144	2.4	PCI-E 2.0 x16 x2	guiminer 2011.05.11	AUSUM switch set to 1 on both cards; Core left at 880MHz, memory left at 1250MHz; VECTORS AGGRESSION=12 BFI_INT WORKSIZE=128
6990x2	1640	1.416		1200	1010	3072	2.1	PCI-E 2.0 x16 x16	phoenix 1.7.0	GPU 910MHz, Memory 785MHz, Powertune 20%; VECTORS AGGRESSION=12 BFI_INT WORKSIZE=128 FASTLOOP=false
6990x2	1700	1.416		1200	1010	3072	2.1	PCI-E 2.0 x16 x16	guiminer 2011.06.14	GPU 1010MHz, Memory 900MHz; -k phatk2 VECTORS BFI_INT FASTLOOP=false WORKSIZE=128 AGGRESSION=13
6990x2	1740	2.11		825	940	3072	2.1	PCI-E 2.0 x16 x16	cgminer 2.0.8	GPU0+3 930MHz core/805MHz memory, GPU1+2 940MHz core/815MHz memory; BIOS switch factory setting; Cooled with 7C air from outside; -g4 -I9 -k phatk
6990x3	2094	-		-	900	-	2.4	PCI-E 2.0 x16 x8 x4	poclbm	GPU 900MHz, Memory 1250MHz; poclbm.py -f 0 -w 256
7750	104.15				800		-	PCI-E 2.0 x16	phoenix	worksize=128 VECTORS FASTLOOP AGGRESSION=10 WORKSIZE=128
7750	117.15				900		-	PCI-E 2.0 x16	phoenix	worksize=128 VECTORS FASTLOOP AGGRESSION=10 WORKSIZE=128
7750	125.5	-	-	-	830	512	2.6 (10.0.898.1)	PCI-E 2.0 x8	DiabloMiner	GPU: 830MHz, Memory: 1125MHz; -v 1 -w 256 source
7750	134	2.66	1.21	50	880	512	2.6 (?)	PCI-E 2.0 x16	cgminer 3.1.0 (Gentoo Linux AMD64)	factory-overclocked to 880 MHz; power draw measured with a Kill-a-Watt, intensity=13, vectors=1, worksize=128, kernel=diablo
7750	136.1	-	-	-	900	512	2.6 (10.0.898.1)	PCI-E 2.0 x8	DiabloMiner	GPU: 900MHz (CCC locked @ 900), Memory: 800MHz; -v 1 -w 256 source
7750	140	-	-	-	950	512	-	PCI-E 3.0 x16	bfgminer 3.0.0	Memory: 900MHz; -I 5 -g 2 -k diablo
7770	182	-	-	83	1020	640	2.6	PCI-E 2.0 x16	poclbm	Ubuntu 10.04 LTS amd64, GPU: 1020MHz
7770	213	-	-	-	1150	640	-	PCI-E 2.0 x16	poclbm	Win7 32bit, Core2Duo, poclbm guiminer
7790	313	-	-	-	1200	896	-	PCI-E 2.0 x16	poclbm	Saphire Radeon HD 7790 OC (2 fans & heatpipes) GPU 20% OC @ 1200mhz / TEMP 57C / FAN 36%, Win8 64bit, cgminer, "intensity" : "10", "vectors" : "1", "worksize" : "256", "kernel" : "poclbm", "thread-concurrency" : "8192",
7790	325	-	-	-	1300	896	-	PCI-E 2.0 x16	poclbm	MSI Radeon HD 7790 GPU @ 1300mhz/ MEM @ 750mhz/ FAN @ 83 / TEMP 67C Win7 64bit, athlon x2, poclbm guiminer , -v -w 128 -f 1
7850	287	1,91	1,1	150	950	1024	2.6	PCI-E 2.0 x16	cgminer	GPU:950 MEM:800, Linux 64bit, Intensive 14, GPU temp = 60°C, Room temp = 25°C, Fan = 60%
7850	329	-	-	150	1100	1024	2.6	PCI-E 2.0 x16	cgminer 2.6.4	Linux 64bit GTK+3, GPU temp = 60°C, Room temp = 25°C, Fan = 60%, -v 1 -k poclbm -I 6 --gpu-engine 1100 --gpu-memclock 950
7850	363	-	-	-	1241	1024	2.6	PCI-E 2.0 x16	Guiminer	GPU:1241 MEM:4840
7870	405	-	-	-	1100	1280	2.6	PCI-E 2.0 x16	Guiminer	Sapphire 7870 OC , GPU: 1100MHz, Mem: 950 Mhz, GPU temp: 65°C, Fan 36% (1377 RPM).
7870	406	-	-	-	1100	1280	2.6	PCI-E 2.0 x16	cgminer	Gigabyte GV-R787OC-2GD, GPU: 1200MHz, [cgminer -I 7]
7870	422	-	-	-	1165	1280	2.6	PCI-E 2.0 x16	cgminer	Sapphire 7870 1ghz edition, GPU: 1165MHz, [cgminer.exe -d 0 -l 1 -T -I 8]
7870	460	-	-	-	1250	1280	2.7?	PCI-E 2.0 x16	Guiminer	MSI R7870 TFIII/oc, Catalyst 12.11 beta4, 455-460 mhash/s @1250 core, 750 mem, 0% Power limit, 1.218v, Zalman VF3000N = 42C, VRMS = 57C, ambient approx. 17-19C, -v -w128 -f10
7870 XT	485	3.09	1.8726	157	1200	1280	2.8	PCI-E 3.0 x16 2.0	cgminer	7870XT clock/mem - 1200/1600
7870xt	520	-	-	-	1200	1536	2.7? lol	PCI-E 2.0 x4	Guiminer	Sapphire HD7870xt, Catalyst 12.11 beta 4, 515-520 mhash/s @1200/core 750/mem, 0%PL, 1.17v/stock, Zalman vf3000a @60-62C even though its sandwiched between a 7870 and 5850. xD
7950	510	-	-	-	985	1792	2.6	PCI-E 3.0 x16	Diablo	Windows 8 x64, Asus P8Z77 WS, i7 3rd Gen, Card is XFX brand, Clock 985Mhz, Mem 1100Mhz, -v 1 -w 256
7950	512	-	-	-	1000	1792	2.6	PCI-E 3.0 x8	poclbm	GPU: 1000MHz, Memory: 850MHz
7950	550	-	-	-	1060	1792	2.8	PCI-E 3.0 x16	Diablo	Core 1060, Mem 800, -v 1 -w 256 Intesity 7
7950	605	-	-	-	1150	1792	2.6 (10.0.898.1)	PCI-E 3.0 x16	DiabloMiner	GPU: 1150MHz, Memory: 1375MHz; -v 1 -w 256
7970	555	-	-	-	925	2048	2.6 (10.0.898.1)	PCI-E 2.0 x16	DiabloMiner	GPU: 925MHz, Memory: 1375MHz; -v 1 -w 256
7970	640	-		-	1070 core/1000 mem	2048	2.6	PCI-E 3.0 x16	cgminer 2.6.5	MSI R7970 Lightning Win7 х64, Catalyst 12.8, GPU 1070 MHz, Memory 1000 MHz, GPU temp = 72°C, Room temp = 28°C, Fan = 57%, cgminer -k diablo -v 1 -w 256
7970	650	-		-	1100	2048	2.4	PCI-E 2.0 x16 x8 x4	Diablo	GPU 1100MHz, Memory 600MHz;
7970	650	-		-	1100	2048	2.6	PCI-E 2.0 x1	cgminer 2.4.1	Win7 х86, Catalyst 12.3, GPU 1100 MHz, Memory 950 MHz, GPU temp = 68°C, Room temp = 25°C, Fan = 58%, -k poclbm -v 1 -w 128
7970	674	-		-	1130 core/1000 mem	2048	2.6	PCI-E 3.0 x16	cgminer 2.6.5	MSI R7970 Lightning Win7 х64, Catalyst 12.8, GPU 1130 MHz, Memory 1000 MHz, GPU temp = 72°C, Room temp = 28°C, Fan = 57%, cgminer -k diablo -v 1 -w 256
7970	685	-		-	1150 core/1000 mem	2048	2.6	PCI-E 3.0 x16	cgminer 2.6.5	MSI R7970 Lightning Win7 х64, Catalyst 12.8, GPU 1150 MHz, Memory 1000 MHz, GPU temp = 72°C, Room temp = 28°C, Fan = 58%, cgminer -k diablo -v 1 -w 256
7970	685	-		-	1177	2048	2.6	PCI-E 2.0 x16	cgminer 2.3.1	Win7, Catalyst 12.3, driver: 2.95, E: 1177, M:685, -k diakgcn -v 2 -w 256
7970	690	-	-	-	1150	2048	2.6 (10.0.898.1)	PCI-E 2.0 x16	DiabloMiner	GPU: 1150MHz, Memory: 1375MHz; -v 1 -w 256
7970	695	-	-	-	1160(core)/1050(mem)	2048	2.6	PCI-E 2.0 x16	DiabloMiner (options: -v 1 -w 256)	Asus HD7970-DC2T-3GD5 @ 1.17V; Linux Ubuntu 11.10 64 bit; AMD SDK 2.6; Catalyst 12.3
7970	710	-		-	1200	2048	2.4	PCI-E 2.0 x16	DiabloMiner	GPU 1200MHz, Memory 600MHz; -v 1 -w 256
7970	714~	-		-	1210	2048	2.7	PCI-E 1.1 x16	cgminer 2.7.4	MSI HD7970 R7970-2PMD3GD5/OC, core clock - 1210Mhz, memory clock - 685, core voltage (1.149V - MSI Afterburner, ~1.043V - GPU-Z), memory voltage 1.5V, temperature - 75C at mid-day and 65C w/ AC on at 20C, Catalyst 12.8, Windows 8 Release Preview 32-bit, kernel - poclbm, vector - 1, worksize - 64, intensity - 14, fan - 100%
7970	825	-		214	1290	2048	2.4	PCI-E 2.0 x16	Bitminter	Bitminter beta 1.1.1; GPU 1290MHz, Memory 1375MHz (Trixx = 600); work size 256, "BFI_INT," Device-accessible CPU memory; full watercooled block; power stats from GPU-Z; Driver 11.12
7970x3	1950	2.6	1.72	750	1100	2048x3	-	PCI-E 2.0 x16	cgminer 2.7.5	Win8, Catalyst 12.8, driver: 8.982.0.0, E: 1100, M:750, kernel: poclbm, worksize: 256, intensity: 9, gpu-threads: 4, refitted Diamond 7970 HSF with new VRM pads to lower VRM temps ~15C. Undervolted each card until crash under load, then raised about 0.015v for stability. Settings using afterburner 2.2.1 with OC unlocked. Visiontek 7970: $370, Sapphire 7970: $360, Diamond 7970: $400
7970x3	2050	2.41	1.22	850	1150	6144	2.6	PCI-E 2.0 x16	cgminer 2.3.1	Win7, Catalyst 12.3, driver: 2.95, E: 1150, M:685, -k diakgcn -v 2 -w 256, 850W power consumption measured at the wall
FirePro V3800	69.0	-		-				PCI-E 2.0 x16	BitMinter Client
FirePro V4800	79.7	-		-	775	400	2.4	PCI-E 2.1 x16	GUIMiner v2011-05-01
FirePro V8700	84.8	-		-	750	800	-	-	poclbm-mod.03.24.2011
FirePro M5800	61.4	-		-	650	-	-	-	poclbm-mod.03.24.2011	Ubuntu
FirePro M5800	69.3	-		-	650	400	2.1	-	GUIMiner v2011-04-26	-v -w128, Windows 7 32bit
FirePro M5950	96.7	-		-	725	900	2.5	PCI-E 2.0 x16	poclbm	-v -w128 (Windows 7 64 bit)
FirePro V5800	119	-		-	690	800	-	PCI-E 2.0 x16	GUIMiner v2011-05-01	Windows 7 32bit
FirePro V5800	144	-		-	690	800	-	PCI-E 2.0 x16	GUIMiner v2011-05-01	-v -w128 (Windows 7 32bit)
FirePro V5800	161	-		-	780	800	-	PCI-E 2.0 x16	GUIMiner v2011-05-01	-v -w128 (Windows 7 32bit)
FirePro V7750	35.7	-		-	-	320	2.4	PCI-E 2.0 x16	GUIMiner v2011-05-21	Windows 7 64bit
FirePro V7800	254.85	-		-	-	1440	2.4	PCI-E 2.0 x16	Phoenix 1.48 with poclbm	Debian Squeeze
FirePro M7740 (M97 GL) [DELL]	63.0	-		-	650	-	2.1	PCIe v2.0 x16	GUIMiner v2011-06-14	Windows 7 64bit / only SDK2.1 works
FirePro M7820	150.0	-		-	700	800	2.1	PCI-E 2.1 x16	GUIMiner v2011-06-09 / poclbm	Memory downclocked to 500 from 1000MHz, 169MH/s@800MHz, 181MH/s@860Mhz (max.), only SDK2.1 works, Windows 7 x86

$ Prices from http://www.amazon.com on 2011-06-25

Nvidia

Model	Mhash/s	Mhash/J	Watts	Clock	SP	Comment
ION	1.8	0.067	27		16	poclbm; power consumption incl. CPU
8200 mGPU	1.2			1200	16	128 MB shared memory, "poclbm -w 128 -f 0"
8400 GS	2.3					"poclbm -w 128"
8400 GS	1.6	0.013	128	1238		DiabloMiner -w 128 -f 1 source
8400M GS	2.0
8500GT	2.4			918	16	poclbm under GUIMiner
8600M GT	4.93				32
8600M GT	3.8					Macbook Pro running Diablo
8600GT	5.66			1188	32
8600GT OC	7.3			1602	32	poclbm -w 128 source
8800GT	25	0.24	105	1300
8800GT	24.5	0.23	105	1300		source
8800GT	31.1	0.296	105	1855		Overclocked 715 GPU / 1030 Memory / 1855 Shader; GuiMiner v2011-05-21
8800GT	31.8	0.303	105	1836	112	713 gpu, 1026 memory. win7x86, phoenix 1.48, -k poclbm WORKSIZE=64 AGGRESSION=5
8800GT	34.0		105	1998		gpu 756M, mem 1123M, shader 1998M, temp 65C. winXP, phoenix 1.50, -k poclbm WORKSIZE=64 AGGRESSION=6 -- same settings get 32.7 MH/s with aggression 2
8800GTS	16.8	0.109	154			source source
8800 GTS	18.7	0.124	150	1200		poclbm -w 64 no vectors
8800 GTS	33.5		150	OC		CUDA mining via GUIminer. Win7 64bit. poclbm -v -w128 -f0. OC'd Core@799MHz, Mem@1080MHz, Shader@1905MHz. Fan 70%, GPU temp @ 66C in comfortable room temp.
8800 GTX	27.5			1404		phoenix 1.48, poclbm, no vectors, 83C with 50C ambient
8800m GTX	16.3					rpcminer-cuda Win7-64
9300GE	1.57			1300	8
9300GS	1.69			1400	8
9300/nForce 730i	2.15			1200	16
9400GT	3.37	0.067	50	1400	16
9400M (MacBook)	1.90	0.32	6	700		poclbm -f 8 no vectors
9500M GS	3.2			950	32	rpcminer-cuda
9500GT	6.75	0.135	50	1400	32
9500GT	7.30	0.135	50	1400	32	rpcminer-cuda, Overclocked 730 GPU/ 500 Memory / fan 100% 70C solid
9500GT	7.10	0.135	50	1767	32	rpcminer-cuda, Overclocked 707 GPU / 500 Memory / fan 100% 73C steady
9600GSO	19.88	0.237	84	1375	96
9600GSO512	11.75	0.131	90	1625	48
9600GT	15.66	0.165	95	1625	64
9600GT Zotac	15			1650	64
9600GT OC	18.8	<0.198	>95	1981	64	poclbm -w 128 -f 10 source source
9600M GS	4.0			1075	32	rpcminer-cuda
9800GT	30.36	0.289	105	1800	112
9800GT EE	19.7	0.263	75	1375	112	rpcminer-cuda
9800GT OC	29.5	0.283	105	1836	112	poclbm.py, no options. Memory underclocked to 850Mhz, GPU overclocked to 733Mhz
9800GTX	32.54	0.232	140	1688	128
9800GTX+	32.6	0.232	140	1688	128	win7x64 275.33 Overclocked to 756/1890/1102 using a CUDA-specific miner (instead of phoenix, yay for ZERO stales!)
9800GTX+	35.39	0.251	141	1836	128
9800GTX+	36					factory OC ubuntu polclbm.py -w 128 -f 10 -a 10 (DO NOT USE -v)
9800GTX+	37.23	0.266	140	1890	128	win7x64 275.27 phoenix(1.48) -k poclbm AGGRESSION=3 WORKSIZE=64 (may cause 75%+ stale count, in which case use a CUDA-specific miner instead)
9800GTX+	40.20	0.287	140	835	128	lowered memory clock higher core, unstable if going higher
9800GX2	57.83	0.294	197		2x128
9800GX2	28	0.142	197		2x128	source
G210	3.38	0.111	30.5	1402	16
G210	3.79	0.124	30.5	1402	16	poclbm -f 1
GT220	10.8	0.084	128	1360		DiabloMiner -w 128 -f 1000 source
GT230	15.5	0.161	96	650	64	(9600GT rebranded one from in a medion pc)
GT240	19.37	0.281	69	1340	96
GT240	21.24				96	poclbm-mod -f 0 -v source
GT240	28.1				96	poclbm -f0 -v (Gainward GT240 1024DDR5 OC core@670/stockmem@1700/shader@1700 - stable; max.temp=73)
GT240M	9.8	0.426	23	550	48	poclbm -f 0 -w 256
GT240 OC	25.6	0.365	70	1765	96	poclbm
GTS250	35.39	0.244	145	1836	128
GTS250	35.2	0.243	145	1836	128
GTS250 OC	37	0.255	145	2047	128	37.2 with the following OC: Core: 775MHz, Shader: 1900MHz, Memory: 1200MHz
GTX260M	22.5			500	112	poclbm 4/28/2011 Asus G71GX runs ~90c without cooling pad
GTX260	35.91	0.178	202	1242	192
GTX260	44	0.242	182	1242	216	source
GTX260c216	40.40	0.236	171	1242	216
GTX260c216	47.4	0.260	182	1348	216	poclbm -w 256
GTX260c216	50.00			1050	216	m0mchil GPU client, Windows 7 64-bit, x6 @ 3.5ghz
GTX260c216 OC	52.0			1461	216	"poclbm -w 256 -f 1"
GTX260c216 OC	58.9			756/400	216	Core overclocked, Memory underclocked, Ubuntu 11.04 Classic Session(No Effects) "poclbm -w 256 -f 1"
GTX260c216 OC	60.1			1706	216	Core: 364 MHz, Shaders: 1706 MHz, Memory: 594 MHz, VDDC: 1.1800V. "poclbm-mod -w 256 -f 1"
GTX275	50.75	0.232	219	1404	240
GTX275	58			729/1458	240	poclbm -f 0 -w 256
GTX280	46.84	0.198	236	1296	240
GTX280	64.34	0.289	245	1296	240	phoenix.exe -k poclbm AGGRESSION=6 WORKSIZE=128 (61*C with Accelero XTREME GTX280)
GTX285	64.8			1607	240	GuiMiner - Not sure about wattage yet. Still testing. Card runs around 74 C
GTX285	53.35	0.262	204	1476	240
GTX295	89.78	0.311	289	1242	480
GTX295	120.70	0.418	289	1242	480	GUIMiner no oc.
GTX295	117.30	0.406	289	1476	490
GT 320M (MacBook Air)	6.12			1212	48
320M (Mac mini 2010)	7.0	0.35	20	450	32	poclbm no extra options, windows 7 x64
GT 325M	7.5			990	48	rpcminer-cuda
GT 325M	10.5			325/650(mem)/1300(shaders)		rpcminer-cuda, 71 degrees
GT 325M	7.99					poclbm -f 0 -w 256
GT330	21.65					poclbm -f 0 -w 256
GT 330M	7.97				48	Model: MacBookPro6,2 VRAM: 512MB Software: DiabloMiner GUI v2011-05-22 / Mac OS X 10.6.7
GT 330M	10.8			650MHZ core	48	Model: MacBookPro6,2 VRAM: 512MB Software: GUIMiner running in Bootcamp v2011-08-24 / Mac OS X 10.6.8.The GPU was OC'd to 650MHZ core clock,mem clock was the lowest it would go in MSI Afterburner.The Bootcamp OS was Windows 7 x64.MBP Mid 2010.
GT 330M (Sony Vaio Z)	7.8	0.71 ( 0.3 total)	11 (26w total)	1045	48
GT 330M (Samsung R480)	9.1			575(GPU)/1265(shader)		VRAM 1024MB. pocblm -vectors --verbose. Windows 7 Ultimate x86
GTS 350M (Toshiba A665-3DV)	17.0	1.214	14	1080		DiabloMiner-Windows.exe
GTS 350M (Toshiba A665-3DV5)	20.8			1350		DiabloMiner-Windows.exe, OC'd 550/850/1350 73C stable
GTS 360M	25.0					[toshiba qosmio laptop, ~150-165*F stock fans]
GTS 360M (ASUS G60jx)	20.0					everythins is stock, it cannot sustain. it reaches 90 degrees and freezes.
GTS 360M (ASUS G60jx)	27.2			Shader @ 1720, Memory @ 900		stock hardware (clean exhaust fan), Afterburner, 72 deg C Stable
GT430	20.24	0.413	49	1400	96
GT440	20.4			1645	96	rpcminer-cuda -aggression=8; winxp x64 driver 275.33
GT530	17.9	0.358	50	1400		BitMinter v1.1.2
GT520M	8.9					rpcminer-cuda, got up 2 10.2MH/s OC'ed
GT525M	14.6					rpcminer-cuda
GT540M	16.0					rpcminer-cuda
GT550M	17.08					rpcminer-cuda -aggression=8
GT610M (ASUS K45V)	9.371			738 MHz		2GB RAM.
GT650M (rMBP)	17.8			900	16	cgminer 2.5.0 on OSX 10.7.4
GT650M OC	27.4					GUIMiner
GTS450	45.28	0.427	106	1566	192
GTS450 (Sparkle One)	40.0					poclbcm git Oct 2012
GTS450	45.28	0.427	106	1566	192
GTX460SE	56.39	0.376	150	1300	288
GTX460	66.32			814	336	rpcminer-cuda 20110605, Graphics Clock @ 814MHz, Memory @ 1555MHz
GTX460	68.31	0.427	160	1350	336
GTX460 768MB	57.8		?	1350	336	rpcminer-cuda -gputhreads=320 -gpugrid=336
GTX460 768MB (MSI Cyclone 768D5/OC)	75.1		?	930	336	rpcminer-cuda on Win7 x64 with ForceWare 275.33. MSI Afterburner set to core: 930MHz, shader: 1850MHz, core voltage: 1.087V, memory: 1600MHz. Runs at 58°C with fan at 75% (ambient 25°C).
GTX460 1GB DirectCU	72.3	?	?	1672	336	rpcminer-cuda -gputhreads=320 -gpugrid=336
GTX460 1GB DirectCU	89.5	?	?	1000	336	guiminer GPU:1000mhz MEM:900
GTX460 1GB ( evga FPB )	71.4	--	--	870/1744/1800	336	guiminer-cuda v2012-02-19 FW290.53 Win7x64
GTX460 1GB ( evga )	83.1	0.519	160	925/1850/900@0.960v	336	guiminer (phoenix1.75) -k poclbm AGGRESSION=8 FASTLOOP BFI_INT -v WORKSIZE=256 ForceWare 301.42 Win7x64 Runs at 70°C with fan at 100%
GTX460 (2 cards)	102	0.319?	320?	1350		source
GTX460 (2 cards) OC	127	0.374	340	1620	2x 336	rpcminer-cuda -gpugrid=128 -gputhreads=128 ver.20110227
GTX460 1GB OC (2x MsiHawksSLI)	158	0.658	240w(used kill a watt)	core/shader/ram@vcore 930/1860/1150@1.087v (only vcore raised)	2x 336	rpcminer-cuda ver.20110227 -gpugrid=320 -gputhreads=320 -aggression=7 Watercooled stable @ 110°F/43° !!!USE ASUS GPU Tweak with GPU-Z (afterburner v2.2.3 wont OC with NVIDIA driver 306.97) I would need gpu bios mod to get more oc/volt. Setting faster ram did increase Mhash/s versus setting ram=core clock.
GTX465	64.41	0.322	200	1215	352
GTX470	81.98	0.381	215	1215	448
GTX470	94.7			1414
GTX470	103.7			1520		memory @ 418MHz, stable @ 72 deg fan @ 90%, puddinpop rpcminer-cuda -gpugrid=96 -gputhread=128 AGGRESSION=14 GIGABYTE brand card BIOS 70.00.21.00.03
GTX470	111.9	0.520	215	1650	448
GTX470	115			1616		phoenix 1.46 poclbm VECTORS BFI_INT FASTLOOP AGGRESSION=6
GTX470x2	121 ea. (130 burst ea.)			1700	448	PuddinPop rpcminer-cuda -gpugrid=96 -gputhreads=128 AGGRESSION=14 (memory 856 Max Temp. 71 deg. F on Water 1.085v+, Stable on Beast 2.0>3 days, no i7 CPU OC, driver 280.26, bios 70.00.21.00.03)
GTX480	101.28	0.405	250	1401	480
GTX480	140.43			1700	480	rpcminer-cuda -gpugrid=512 -gputhreads=480
GTX480 AMP!Zotac	140.1			1700	480	rpcminer-cuda -gpugrid=480 -gputhreads=480 (vCore-1050,Core Clock-851, Shader Clock-1702, Memory Clock-2033, t-79°c, Water 43°c, stable temperature and work)
GTX550 Ti	45.0	?	?	?	?	EVGA 1GB, WinXP rpcminer, no overclock
GTX560 Ti	67.7	0.39	170	1700	384	standard EVGA 560, no overclock
GTX560 Ti	74	0.41	170	822	384	MSI 560Ti HAWK; core 822 Mhz clock (no overclock); rpcminer-cuda.exe -aggression=4 -gpugrid=64 -gputhreads=384; temp - 71°C; Win 7 x64
GTX560 Ti	74.8	0.41	180	1700	384	gigabyte 900Mhz clock; -w 512 -v
GTX560 Ti	81	0.45	180	835	384	Gainward GTX560TI Phantom, default clock, rpcminer-cuda
GTX560 Ti	85.1	-	-	-	-	cgminer 2.5.0, linux 32bit, nvidia 295.41, Intensity: 14
GTX560 Ti	100	0.5	200	1000	384	GFX - MSI 560Ti HAWK; rpcminer-cuda.exe -aggression=8 -gpugrid=64 -gputhreads=384; GPU temp - 68°C; OS - Windows 8 x64 .
GTX 560M	39.3	0.38	75 W	775	192	source1 source2 Note: Uses the 295.51 Beta Drivers
GTX560 OC	86.7	<0.51	>170	1800	384	rpcminer-cuda source
GTX570	105.83	0.483	219	1464	480
GTX570	140	0.639	219	750	480	rpcminer-cuda.exe -aggression=10 -gpugrid=480 -gputhreads=960; display driver stops working with aggression=11 under win7 x64 driver 270.61
GTX570	157	0.717	219	850	480	rpcminer-cuda.exe -aggression=11 -gpugrid=120 -gputhreads=960
GTX570	165			925	480	rpcminer-cuda.exe -gpugrid=120 -gputhreads=960; vcore 1.1v; Win7 x64 304.79 Beta; -aggression=11 adds strong lag with minimal increase in hashrate.
GTX570	160			925	480	rpcminer-cuda.exe -gpugrid=104 -gputhreads=832; No desktop lag, very minimal loss in hashrate compared to much laggier settings
GTX580	156.6	0.642	244	1544	512	cgminer 2.11.3 on Win 8-64 with I=6, driver nVidia 314.22
GTX580x2	2x 146	0.598	244	1544	512	rpcminer-cuda.exe -gpugrid=128 -gputhreads=1024 (aggression levels above the default of 6 not recommended; only a gain of ~3MH/s per card, and heavy lag, GUIMiner v2011-08-24, win7 64bit nVidia 290.36 beta driver)
GTX590	193.1	---	---	1215	2x 512	poclbm -v -w 256, Win
GTX590	2x 121.48	---	---	750	2x 512
GTX670	112.00	1.1	100	1275	1344	EVGA GTX670FTW 2GB / GPU Clock offset +75Mhz with EVGA Precision X / GUIMiner -f 60 / Windows 7 64-Bit. (09-13-2012)
GTX680	127.3			1280	1536	Asus GTX 680 2GB DirectCU II: Windows 7 64 bit: Nvidia 310.90 driver: Offset of 186: Runs at a constant 52C
GTX680	110.00			1110	1536	RPCMiner with OpenCL or others. Might crash once mining stops. No Flags and Stock Settings (GPU Boost @ 1110mhz Core) with EVGA GTX 680, latest version of GUIMiner (2012-2-19) and Windows 7 x64.
GTX680	120.00	1.2	100	1272	1536	Ufasoft Galaxy 4GB (GPU Clock offset +70Mhz with EVGA Precision X) (2012-7-28) and Windows 7 64-Bit.
Quadro FX 580	5.7	0.14	40	1125	4	rpcminer-cuda, Win, -gpugrid=128 -gputhreads=512
Quadro FX 770M	5.75			500	32	DiabloMiner-Windows.exe BFI_INT FASTLOOP AGGRESSION=6, Win
Quadro FX 770M	6.39			500	32	DiabloMiner-Windows.exe BFI_INT FASTLOOP AGGRESSION=6 w 64, Win 7x64
Quadro FX 880M	9.6					poclbm/guiminer
Quadro FX 1600M	6	0.12	50	625	32	rpcminer-cuda, Win
Quadro FX 1800	13.6	-	-	-	-	cgminer 2.5.0, linux 32bit, nvidia 256.44 Intensity: 4
Quadro FX 2000M	23	0.397	58			phoenix 1.48, -k poclbm, VECTORS, AGGRESION=6, Lenovo W520 platform
Quadro FX 2800M	22	0.293	75	600	96	DiabloMiner, win
Quadro FX 3000M	28.6	-	-	-	-	cgminer 2.5.0, linux 32bit, nvidia 295.41 Intensity: 3
Quadro FX 3600M	36	0.514	70	500	96
Quadro FX 3800	33.3					poclbm/guiminer -f0 -w128
Quadro NVS 135M	1.05	0.1	10	800	1
Quadro NVS 295	1.7	0.07	23	567	8	phoenix
Quadro NVS 3100M	3.6	0.257	14	600	16	rpcminer-cuda, Win, CUDA 3.1.1
Quadro NVS 4200M	10.0			810		guiminer, Win7-64
Quadro 5000	67.7	0.445	152	513	352	rpcminer-cuda.exe -aggression=7 gpugrid=352 gputhreads=704;
Tesla C1060	52.5			1296	240	poclbm, Win7x64
Tesla K20	134.8			706	2496	poclbm, Linux
Tesla M2050	79.8			1550	448	DiabloMiner
Tesla M2050	94.5			1550		poclbm
Tesla S1070	155.2		800 [1]	1440 (GT200b)[1]	960[1]	rpcminer-cuda, Linux, CUDA 3.2, 4 instances (-gpu=0 through -gpu=3)
Tesla S2070	749.23			1150[2]	1792[2]	rpcminer-cuda, Linux, CUDA 4.0, 8 instances (-gpu=0 through -gpu=7)
GTX280x2	102.7

The S1070 is a dedicated supercomputing platform that features four Tesla units (GT200). Technical data taken from NVIDIA
The S2070 is a dedicated supercomputing platform that features four Fermi units (C2070). Technical data taken from Wikipedia (Documentation from NVIDIA webpage is confusing)

CPUs/APUs

A lot of nice data can be pulled from this thread to seed this section.

Might you wish to throttle CPU load a bit, so it doesn't reach 100°C, it can be done with Battle Encoder Shirase to a margin, like, -15% of available CPU cycles.

Often, the best combination to be is to throttle CPU miner to -5% AND set it to least of priority levels, so as not to choke GPU miner up.

AMD

Model	nprocs	Mhash/s	Mhash/J	TDP [W]	CPU Clock	Mhash/s CPU	Mhash/s GPU	GPU	GPU Clock	SP	Software	Notes
4x Opteron 6174	48	115	0.36	320W	2.2 GHz	2.4					cpuminer v0.8.1	--alg 4way --threads 48
2x Opteron 6172	24	55	0.24	230W	2.1 GHz	2.3					cgminer v2.7.6	--algo 4way -t 24
2x Opteron 6128	16	32.4	0.141	230W	2 GHz	32.4					0.3.19	-4way
Athlon XP 2000+	2	0.62	0.009	70W	1.67 GHz	0.62					0.3.18/Ubuntu	source source
Athlon 64 3500+	1	1.18	0.013	89W	2.54 GHz	1.18					ufasoft v0.4	overclocked (originally 2.2 GHz)
Athlon 64 X2 3800+	2	1.73	0.03	65 W	2.00 GHz	1.73					cpuminer (v0.8.1-1-g69529c3)	-algo=4way
Athlon 64 X2 4000+	2	1.9	0.02	65W	2.1 GHz	1.9					rpc-miner
Athlon 64 X2 4400+		2.09	0.032	65W	2.3GHz	2.09					0.3.19/Win x64	source
Athlon 64 X2 6000+	2	2.81	0.02	125W	3 GHz	2.81						source
Athlon 64 X2 6400+ Black Edition	2	2.9	0.023	125W	3.2 GHz	2.9					0.3.20.2 BETA/Win 7 x64	-4way
Athlon II X2 240e	2	2.71	0.06	45W	2.81 GHz	2.71					bitcoind	source
Athlon II X2 250	2	5.6	0.09	65W	3.01GHz	5.6					bitcoin-miner 0.11
Athlon II X4 630	4	10.7	0.11	95W	2.8 GHz	10.7					bitcoin-miner 0.4
Opteron 8220 x16	16	25			2.8Ghz	1.5					ufasoft / OpenSuse 64bit	running default, but had to copy 32bit binaries over to get curl and ufasoft running. might be better when using native 32bit system w/o other users on the machine
Phenom II X3 720	3	3.8	0.04	95W	2.8 GHz	3.8					0.3.1x/WinXP	source
Phenom X4 9950 BE	4	9.3	0.07	126W	2.6 GHz	2.32					bitcoin-miner 0.13/WinXP	No GPU
Phenom II X3 720	3	7.2	0.08	95W	2.8 GHz	7.2					cpu-miner 0.2.1/WinXP	source
Phenom II X4 810	4	5.0		95W	2.8 GHz						rpcminer-cpu
Phenom II X4 810	4	9.5		95W	2.8 GHz						rpcminer-4way
Phenom II X4 810	4	10.5		95W	2.8 GHz						ufasoft v0.10
Phenom II X4 810	4	11.5		95W	2.8 GHz						cgminer 1.5.3	"cgminer 1.5.3 --algo 4way" on Ubuntu 11.10 alpha 2 (64 bit), built by GCC 4.6.1 with "-O3 -Wall -march=native"
Phenom II X4 955	4	11	0.09	125W	3.2 GHz	11					rpcminer-4way
Phenom II X4 965	4	12	0.09	140W	3.4 GHz	11					rpcminer-4way
Phenom II X6 1055T	6	15.84	0.13	125W	2.82 GHz	15.84					bitcoind	source
Phenom II X6 1055T	6	23.6		95W	3.50 GHz	23.6					pooler's cpuminer 2.2.2	--algo=sha256d
Phenom II X6 1075T	6	21.3		125W							minerd	Ubuntu 11.04 amd64 runlevel=1 -algo=4way -threads=6
Phenom II X6 1090T	6	18		141W	3.50 GHz	3					minerd
Phenom II X6 1100T	6	22	0.176	125W	3.82 GHz	22					bitcoin-miner	Aciid#bitcoin-dev
Sempron 3000+	2	0.8		62W	1.6 GHz	0.8					cpuminer	--alg 4way
Turion X2 RM-70	2	1.9		65W	2.1 GHz	1.9					cpuminer	--alg 4way
Zacate E-350	2	11	0.615	18W	1.6 Ghz	1.231	9.831	HD6310M	492 Mhz	80	poclbm -v -w128 + Ufasoft 0.7	stock speeds
Zacate E-350	2	12			1.648 Ghz	1.252	10.87	HD6310M	492 Mhz	80	poclbm -v -w 256 -f 1	"autotune" speed with ASUS EFI BIOS
Ontario C-50	2	6.2	0.68	9W	1.0 Ghz	1.200	6.2	HD6250M	277 Mhz	80	poclbm -v -w128 -f5 -r5
A4-3400	2	23.2			75W	2.4 Ghz		23.2	6350	stock		GUIminer
A8-3850	4	60		100W	Stock		60	HD6550D	Stock	400	poclbm.exe, Win7-32, 4GB RAM	All running at stock speeds, and set to auto in BIOS.
A8-3870K	4	95		100W (@stock)	3.3 Ghz		95	HD6550D	900MHz	400	phoenix.exe -k phatk VECTORS BFI_INT AGGRESSION=4 WORKSIZE=128, Win7-64, 8GB RAM 1667MHz	M/B ASUS F1 A75-M Pro, CPU/GPU BIOS overclocked
A10-5800K	4	105		100W	3.8 Ghz		105	HD7660D	800MHz	384	cgminer Intensity=7	Linux 64bit (Ubuntu 12.10), AMD-APP-SDK-v2.7-RC-lnx64, stock speeds not overclocked

ARM

Model	p/t	Mhash/s	Mhash/J	Mhash/s/$ /€	ACP [W]	Clock	Version	Comment
ARM926EJ-S	1	0.187	?	?	?	1.2 GHz	cpuminer	Seagate Dockstar ArchLinux
Marvel Feroceon (88FR131)	1	0.195	0.224	<0.01	0.87 W	1.2 GHz	cpuminer git (2011-06-15)	Marvell SheevaPlug, Debian, 'c' algo
ARM1136EJ-S	1	0.11	?	?	?	0.528 GHz	cpuminer git	T-Mobile Pulse, inside Debian chroot, 'c' algo
ARM1176JZ(F)-S	1	0.119	?	?	?	0.412 GHz	pooler's cpuminer 2.2	iPhone 3G, 'sha256d' algo
ARM1176JZ(F)-S	1	0.2	?	?	3.75W	800 Mhz	cgminer 2.5.0	RaspberryPi Model B, SoC BCM2835, Debian Squezee 19-04-2012, Overclocked Cpu 800mhz
Cortex-A8	1	0.125	0.36	<0.01	0.35 W	0.6 GHz	cpuminer git (2011-03-26)	Nokia N900: 'cryptopp'
Cortex-A8	1	0.2	0.57	<0.01	0.35 W	0.6 GHz	cpuminer git (2011-03-26)	Nokia N900: 'c' algo
Cortex-A8	1	0.365	?	?	?	0.6 GHz	pooler's cpuminer	BeagleBoard: 'sha256d' algo
Cortex-A8	1	0.435	?	?	?	0.8 GHz	pooler's cpuminer 2.2	'sha256d' algo
Cortex-A8	1	0.44	?	?	?	0.8 GHz	cpuminer 2.2.3 (-mfpu=neon)	EfikaMX (iMX.51), CRUX ARMHF, cpuminer -a sha256d
AllWinner A10(A8)	1	0.568	?	?	<2.5W	1.0 GHz	pooler's cpuminer 2.2	-a sha256d #Native Lubuntu armhf build
Cortex-A9	2	0.57	1.14	<0.01	0.5 W	1.0 GHz	cpuminer git (2011-03-24)	Toshiba AC100, ubuntu, 'c' algo
Cortex-A9	2	1.3	?	?	?	1.2 GHz	pooler's cpuminer 2.2.3	Samsung Galaxy S II - CFLAGS="-O3 -mfpu=neon"

Intel

Model	p/t	Mhash/s	Mhash/J	Mhash / $[1]/€[2]	ACP [W]	Clock [GHz]	Version	Comment
Pentium III (Coppermine)	2	0.39	0.008		TDP 2× 26.1 W	1	Ufasoft 0.32 (compiled from source), Debian Squeeze	source
Pentium III mobile ?	1	0.3	0.014		21	1.07	0.3.1x/Win2K	source source
Pentium M 1.6ghz	1	0.4				1.6	minerd (jgarzik's 1.0)	cryppto, Windows 7
Pentium M 1.6ghz	1	0.62				1.6	Ufasoft 0.20	Windows XP Professional
Pentium M 1.6ghz	1	0.71				1.6	pooler's cpuminer 2.2	Gentoo Linux
Pentium M 1.73ghz	1	0.5				1.73	minerd (jgarzik's 1.0)	cryppto, Windows 7
Old Xeon 512k (Dual)	2x1/2	2.0				3.0	cpuminer (v0.8.1-1-g69529c3)	HT disabled, algo=4way (twice as fast as the 2nd best algo)
Pentium 4 2.0A	1	0.85				2.0	ufasoft-0.4/WinXP	-g no -t 2
Pentium 4 630	1/2	1.29				3.0	ufasoft 0.23	Windows XP
Pentium Dual-Core E2180	2/2	1.75				2.0	rpcminer-cpu	Win7-64
Pentium Dual-Core E2180	2/2	4.1				2.0	cpuminer	sse2_64
Pentium Dual-Core E2180	2/2	4.5				2.0	ufasoft v0.11	Win7-64
Pentium Dual-Core E5400	2/2	2.27	0.03		65	2.7	bitcoind	source
Celeron E330	2/2	2.2	0.03		65	2.5	0.3.19/Ubuntu10.04	source
Celeron E3400	2/2	5.9	-	-	-	2.6	Ufasoft v0.13 / GUIMiner v2011-06-14	WinXP 32 bit, SSE2, Flags "-g no"
Core 2 Quad Q6600	4/4	11.0		0.02/0.06	105	2.40	bitcoin-miner 0.10	-a 60 -g no -t 4
Core 2 Quad Q8200	4/4	10.9		0.06/0.10		2.33	Ufasoft 0.14	-g no -l yes -t 4
Core 2 Quad Q9400	4/4	11	0.046	0.06/0.07	95	2.66	bitcoin-miner 0.10	-a 60 -g no -t 4
Core 2 Quad Q9650	4/4	18.67		0.05/0.06	95	4.00	bitcoin-miner 0.10	-a 60 -g no -t 4
Core i3 530	2/4	8.31	0.10	0.06/0.10	80	3.66	Ufasoft 0.7	-v -a5 -g no -t 4
Core i3 M350	2/4	1.48	0.04		35	2.27	bitcoind	source
Core i3-2100	2/4	8.28				3.1	ufasoft v0.20
Core i5 M450	2/4	1.8	0.05		35	1.2	0.3.17/Win7-54	source
Core i5-650	2/4	5.1	0.04 ?	0.02/0.03		3.2	cpuminer-0.7	-4way
Core i5-750	4/4	14		0.06/0.10		3.2	bitcoin-miner 0.11	-a 5 -g no -t 4
Core i5 ?	4/?	6.5					client from svn	source
Core i5-2400	4/4	4.5	0.05	0.02/0.03	95	3.1	cpuminer git (2011-01-22)	cryptopp_asm32
Core i5-2400	4/4	14	0.15	0.07/0.09	95	3.1	cpuminer git (2011-03-26)	sse2_64
Core i5-2400S	4/4	16.6			65	2.5	pooler's cpuminer 2.2.3	Linux Mint 13
Core i5 2500K	4/4	20.6		0.10/0.12		4.2	bitcoin-miner	-g no
Core i5 2600K	4/8	17.3			75	3.4	bitcoin-miner	-g no. 75W for the whole System without monitor (MSI Board). CPU underclocked to 3,4Ghz and undervolted to 1,012Vcore. Passive Cooling! 3.6ghz results in 18,4 Mhash/s
Core i7 2600K	4/8	18.6			95 W max.	3.4	Ufasoft bitcoin-miner 0.20	-g no -t 8 CPU @ 3.511Ghz 1.176V
Core i7 2600	4/8	23.9				3.4	pooler's cpuminer 2.2	Ubuntu Linux 11.10
Core i7 620M	2/4	1.888				2.66	RPCMiner GUI v2011-05-22 / Mac OS X 10.6.7	Model: MacBookPro6,2 RAM: 4GB
Core i7 620M	2/4	6.5				3.33	This is achieved by running RPC 4 way miner in VMware Fusion 4 (running win 7 in the VM) while in Mac OSX / Mac OS X 10.6.8	Model: MacBookPro6,2 RAM: 8GB.The CPU appears to turbo boost to 3.33GHz in this way from 2.67GHz when running it in this way.The MBP gets very hot and uses a lot of energy though so watch those temps.It'll throttle after a while unless you keep the air vents clear underneath (ie don't put int in your lap,etc).
Core i7 720QM	4/8	7.9	?		45	2.8	ufasoft	stream processors overclocked from 1.6 GHz; Dell Precision M6500, Win7-64, 8GB DDR3
Core i7 820	4/8	13.8				2.8	ufasoft	-t 8
Core i7 920	4/8	19.2	0.10		195	4.0 (x21)	ufasoft	-a 5
Core i7 950	4/8	5.88	0.039		150	3.83 (x23)	bitcoin-0.3.20.2 Win7-64
Core i7 950	4/8	18.9	0.126		150	3.83 (x23)	ufasoft v0.4
Core i7 980x	6/12	19.2	0.15		130	4.4 (x33)	cpuminer/Win7-64
Core i7 980x	6/12	8.7				3.9 (x27)	0.3.17/Win7-64
Core i7 990x	6/12	33.3				4.5 (x32)	ufasoft/Win2008 R2-64	Ram - 12Gb, Rampage III BlackEdition, Water cooling
Core i7 2635QM	4/8	2.93				2.00	RPCMiner GUI v2011-05-22 / Mac OS X 10.6.7	Model: MacBookPro8,2 RAM: 4GB
Core i7 620M	2/4	6.3	0.18		35	2.66	ufasoft v0.4
Core i7 2600k	4/4	6.7				4.00	phoenix 0.48
Core i7 3770k	4/8	5.2				4.4	Guiminer v2012-12-03	Windows 7 x64 : -v argument increased Mhash/s from 5.0 to 5.2
Core i7 3930k	6/12	66.6				4.625 (125 x 37)	Ufasoft bitcoin-miner v0.28	Windows 7 x64, uses ~190watts : -v argument increased Mhash/s from 36.0 to 66.6
Core 2 Duo U7600	1	1.1				1.2	minerd (jgarzik's 1.0)	cryppto, Windows 7
Core 2 Duo E5200	2/2	6.2	0.086		72	2.76	Ufasoft/Win7-64	TDP is 65W + 7W overclock
Core 2 Duo E6550	1/2	2.45				2.33	cpuminer 0.7.1 (Linux)	--algo=sse2_64
Core 2 Duo E6850	2/2	6.75	0.10		65	3.0	ufasoft-0.3
Core 2 Duo E7300	2/2	7.76	0.11		70	3.33	ufasoft-0.3	uncertain of overclock; miner optimized for Intel Core
Core 2 Duo E7300	2/2	2.52	0.04		65	2.66	bitcoind	source
Core 2 Duo E8200	2/2	2.3	0.035		65	2.66	rpcminer-cpu
Core 2 Duo E8400	2/2	6.9	0.106		65	3.0	ufasoft v0.10	windows 7/64bit (-t 2)
Core 2 Duo E8500	1/2	3.6				3.16	guiminer v2011-06-14	windows vista 32bit
Core 2 Duo E8500	2/2	7.2				3.16	guiminer v2011-06-14	windows vista 32bit
Core 2 Duo P8700	2/2	5.9				2.53	ufasoft v0.21	windows 7/64bit
Core 2 Duo T5450	2/2	2.5	0.07		35	1.63	bitcoin-miner 0.10	Ubuntu 11.04
Core 2 Duo T5500	2/2	4.3				1.66	pooler's cpuminer 2.2	Gentoo Linux (amd64)
Core 2 Duo T6400	2/2	4.2	0.12		35	2.00	cpuminer git (Linux)	--algo=sse2_64
Core 2 Duo T7250	2/2	4.5	0.13		35	2.00	bitcoin-miner 0.13/WinXP	No GPU
Core 2 Duo T7450	2/2	3.7	0.10		35	2.13	bitcoin-miner 0.10	Ubuntu 11.04
Core 2 Duo T9400	2/2	4.2				2.53	ufasoft v0.13	Win7-64
Core 2 Extreme X9000	2/2	2.37				2.8	rpcminer-cpu	Win7-64
Core 2 Extreme X9000	2/2	6.2				2.8	ufasoft v0.11	Win7-64
Core 2 Extreme X9000	2/2	7.2				3.2	ufasoft v0.11	Win7-64 Overclocked from 2.8 GHz to 3.2 GHz
Xeon 2.8	2/2	0.8				2.8	cpuminer	cryptopp_asm32
Xeon 3060	1/2	2.03	0.03		65	2.	cpuminer 0.8.1 (Linux)	--algo=cryptopp_asm32
Xeon Prestonia 2.4 (dual)	2x1/2	2.16	0.017		130	2.4	ufasoft v0.4
Xeon X5355 (dual)	2x4/4	10.13	0.16		120	2.6	bitcoind	Roughly the same speed as the "c" algo in cpuminer
Xeon E3-1230 V2 (quad)	4/8	19.7	?	?	?	3.70	cgminer 2.8.3	-O2 -march=core-avx-i algo=sse2_64
Xeon X5355 (dual)	2x4/4	22.76	0.09		120	2.6	cpuminer (v0.8.1-1-g69529c3)	-O2 -march=core2, algo=sse2_64
Xeon X5365 (dual)	2x4/4	26.00	?		?	3.0	cpuminer git (2011-06-15)	algo=sse2_64
Xeon X5650	2x6/24	28.6	?	?	?	2.67	cpuminer 1.0.2	--algo 4way
Xeon x5680 (dual)	2x6/24	48	?	?	?	3.33GHz	Ufasoft 0.29	CentOS 6.2 x86_64
Xeon x5690 (dual)	2x6/24	52	?	?	?	3.46GHz	Ufasoft 0.29	CentOS 6.2 x86_64
Xeon E5-2690 (dual)	2x8/32	66	?	?	2x135W	2.9GHz	Ufasoft 64-bit 0.31	Windows Server 2008R2 x64
Xeon E5335	4/4	9.35	0.12		80	2.00	ufasoft v0.11	Vista-32
Xeon E5410	4/4	9.8	?		80	2.33	ufasoft v0.10	CentOS 5.5 x64
Xeon E5440	4/8	7.3	?		80	2.66	Kiv's poclbm-gui	FIXME: Either wrong model # or wrong threads/speed info
Xeon E5506	4/4	9.6	?		80	2.13	ufasoft v0.10	CentOS 5.5 x64
Xeon E5520	4/8	6.5	0.08		80	2.27	bitcoind	source
Xeon E5530	4/8	7.14	0.09		80	2.4	bitcoind	source
Xeon E5620	4/8	11.2	?		80	2.4	ufasoft v0.10 -t 4	CentOS 5.5 x64 Hyper-Threading is off
Xeon E5630 (dual)	2x4/8	8	0.1		80	2.53	0.3.17/Win7-64	source
Xeon E6520 (dual)	2x4/8	24.7				2.53	ufasoft v0.10	windows 2008 R2 64bit (-t 16)
Xeon E7220	2/2	6.3	?		80	2.93	ufasoft v0.10	CentOS 5.5 x64
Xeon E7320 (dual)	2x2	1.5				2.8	cgminer v1.2.8	2x2.8ghz dual core running Ubuntu 11.04 x86 (individual cores get 0.4 MH/s)
Xeon E7450 (quad)	4x6/24	60				2.40	ufasoft v0.13	-t 24
Xeon E7520 (dual)	2x4/16	18			95	1.87	ufasoft v0.10	windows 2008 R2 64bit (-t 16)
Xeon W3680	6/12	18			130	3.33	cpuminer v1.0.2 --algo=4way	Ubuntu 11.04 64bit
Atom Z520	1/2	1.20			2	1.7	ufasoft 1.18	Asus Eee 1101HA with overclocking capabilities
Atom N230	1/2	0.375			4	1.6	rpcminer-cpu
Atom N230	1/2	0.245			4	1.6	rpcminer-4way
Atom N230	1/2	0.97			4	1.6	ufasoft v0.10
Atom N270	1/2	1.19	0.24		5	1.6	ufasoft v0.10
Atom N450	1/2	1.60	0.31		6.5	2.06	ufasoft v0.10
Atom N550	2/4	1.97				1.5	ufasoft v0.21	Windows 7/64 bit
Atom 330	2/4	1.80			8	1.6	ufasoft v0.13	-t 4
Atom D510	2/4	1.00				1.6	cpuminer w cryptopp_asm32	debian linux 6.0, headless system, 2 GB RAM, running from usb-flash
Atom D510	4/4	2.3	0.07		30	1.6	bitcoin-miner 0.10	Ubuntu 11.04 Server
Xeon Phi 5100	60/240	140				1.053	pooler's cpuminer port	native mode

$ Prices from http://www.amazon.com on 2011-06-25
€ Prices from http://geizhals.at/eu on 2011-06-25

Other

Model	p/t	Mhash/s	Mhash/J	Mhash/s/$	ACP [W]	Clock	Version	Comment
Cell	6	21	0.35	0.07	60W	3.2 GHz	Cellminer	Sony Playstation 3 (FAT): Needs custom firmware. source source Total power usage of PS3 fat is 120W but only the Cell cpu is active.
Cell	7	26.6	?	?	60W	3.2 GHz	Cellminer	Sony Playstation 3 (FAT): Needs custom firmware. source source Running with 7th spu enabled and both ppe cores.
Cell	6	21	0.7	0.07	35W	3.2 GHz	cellminer	Sony Playstation 3 (SLIM): Total power usage of PS3 slim is 70W but only the Cell cpu is active.
MIPS	1	0.026	?	?	?	200 MHz	cpuminer	ASUS WL-500G Deluxe Router Running OpenWrt
VIA Eden	1	1.3	0.17		8W	1600 MHz	cpuminer	VIA Eden w/ padlock
PowerPC 7447A	1	0.53				1420 MHz	cpuminer
PowerPC 7450 (G4e)	1	1.29				1670 MHz	cgminer 2.0.7	PowerBook5,6; Mac OS X 10.5.8; Altivec
PowerPC 750 (G3)	1	0.140				600 MHz	cpuminer	iBook G3 600 w/ Cryptopp
IBM POWER4+ 2/way	2/1	0.58				1450 MHz	cpuminer 2.2.3	CRUX PPC (64bit), cpuminer -a sha256d -t 1
IBM Power7 (PowerPC)		7.6				3.5 Ghz	cgminer	IBM Power7 770, SuSE Linux 11.1, 4 cores, OpenCL, YASM, Altivec
Google App Engine	1	0.144			0W		pyminer	Modified version of pyminer for GAE.
Open Shift	1	0.059			0W		pyminer